Other electrical accessories

Stainless steel with clip Max. 400 bar / 150°CAdapter for connecting hoses with 11 mm plug nipple.

Incl. 5 sets of pressing jaws:12 - 14 mm14 - 16 mm16 - 19 mm19 - 23 mm23 - 27 mmKey features of the P16 HP:Press head accessible from both sidesCompact designTwo-stage hand pumpPress size adjustment is steplessPressing dimension control via signal lampCarrying handleDrawer recessed in the housing for storing the pressing jawsThe P16 HP hose press is a sophisticated, high-quality machinespecially developed for the assembly and repair of hose lines on site.on site.The press is easy to learn to use thanks to its practical design.Technical data:Length of base jaws: 64 mmMax. Opening diameter: Min. press diameter + 20 mmCrimping capacity: 2-wire hose up to DN 25Crimping range: 10 - 45 mmMax. Pressing force: 720 kNCapacity per stroke: 3.62 cm3 / 0.90 cm3Pressure: 14 bar / 630 barWeight (without oil): 20 kgDispatch by forwarding agent.

Hose stopper for hose reels Outer diameter 54.5 mm

IFM proximity switch IA0032suitable for Christ gantry car washes, car washes and underbody washes. Description: Cylindricaldesign, mounting with mounting clamp Versions with 2 m cable or connection terminal compartment, terminal compartment can be angled by 90 2-wire universal current or 3-wire PNP DC Normally open or programmable as normally closed or normally closed contact Technical data Design ø 20 mm Switching distance max. 10 mm max. Output Programmable Connection Connection terminals Operating voltage 20...250 VAC/DC Operating temperature -25...+80 °C

Repair kits for Suttner Recirculation valve ST-261:Microswitch

Thermal tripping and phase failure protectionSurface-mounted switch with rotary knob3-pole10,00 - 16,00 ARated insulation voltage Ui according to IEC 947-4-7 / VDE 0110: 500 V ACPermissible ambient temperature:Storage temperature: -25...+ 70°Copen: -25...+ 60°Cencapsulated: -25...+ 40°CTemperature compensation: yesClimatic resistance: IEC 68 T2-3, 2-30Flame resistance according to IEC 695-2-1: degree of severity 850°CInstallation position: preferably verticalPermissible altitude: 3000 mPermissible vibration IEC 68-2-6: 25 Hz b. ± 1 mm amplitude (2.5 g)Permissible direction of impact Sine impulse: 20 g (11 ms)Fastening (screw fastening): 2 x M4* (*not included in the scope of delivery)Mechanical service life in switching cycles: 100,000Maximum switching frequency Switching cycles / hour: 30Number of main current paths: 2 / 3Rated operating voltage: >37 A / 250 VUe to: >27 A / 500 VThermal continuous current Ith2: 37 A, 2-poleRated operating current Ie: 27 A, 3-poleCurrent ranges Ie: 22 - 37 A, 2-polein accordance with VDE 0660 Part 102 A, IEC 947-4-1: 0.25 - 27 A, 3-poleNumber of ranges 2 / 11Current heat losses main current paths at Ie max./phase: 1.8...3.2 W

Motor-protective circuit-breaker MS25, 3-poleThermal trippingSetting ranges from 6.3 - 10.0 A; 500 V ACCompliance with standardsIEC 60947IEC 60204VDE 0660VDE 01113

Installation cut-out: 45 x 45 mm or 22 x 45 mmProtection class: IP67 frontConnection spade connector 6.3x0.8 with screwsDescription: Excellent quality, Long service life, DIN dimensions, Approvals, Without resetApplications: Generators, compressors, pumps, switch cabinets, air conditioning systems

Installation cut-out: 45 x 45 mm or 22 x 45 mmProtection class: IP67 frontConnection spade connector 6.3 x 0.8 with screwsDescription: Excellent quality, Long service life, DIN dimensions, Approvals, Without resetApplications: Generators, compressors, pumps, switch cabinets, air conditioning systems

Installation cut-out: 45 x 45 mm or 22 x 45 mmProtection class: IP67 frontConnection spade connector 6.3x0.8 with screwsDescription- Excellent quality- Long service life- DIN dimensions- Approvals- Without resetApplications- Generators- compressors- Pumps- Switch cabinets- Air conditioners

Plastic wall hose holder for indoor or outdoor use. Capacity: Hose 1/2" = 40 m Hose 3/4" = 30 m Hole spacing 140 mm W x H x D = 260 x 170 x 170 mm

Switch retrofit kit for the ST-265 recirculation valve

Bimetal temperature switchFor switching voltages up to 250 VType TFS135Max. Switching outputAC 120 V / 60 Hz / 5 AAC 250 V / 50 Hz / 2.5 ADescriptionTemperature switches are generally used in industry to limit temperatures. They monitor the temperature of machines and devices and switch off the machine or switch on a fan to cool the device in the event of overheating, for example.switch on a fan to cool the appliance.FunctionThe TFS135 temperature switches are based on bimetals.The temperature is detected by means of a bimetallic disc, which is activated when theswitching temperature (NST) is reached.After cooling down to the reset temperature (RST), the switch returns to its original state.The reset temperature is typically 15 ... 30 K below the switching temperature.Contact designThe bimetal temperature switch type TFS135 is equipped with a normally closed contact.An NC contact (NC = Normally Closed) opens a circuit and switches off a machine.After cooling down below the reset temperature, the contact returns to its original state so that the monitored device can resume normal operation.

Bimetal temperature switchFor switching voltages up to 250 VType TFS135Max. Switching outputAC 120 V / 60 Hz / 5 AAC 250 V / 50 Hz / 2.5 ADescriptionTemperature switches are generally used in industry to limit temperatures. They monitor the temperature of machines and devices and switch off the machine or switch on a fan to cool the device in the event of overheating, for example.switch on a fan to cool the appliance.FunctionThe TFS135 temperature switches are based on bimetals.The temperature is detected by means of a bimetallic disc, which is activated when theswitching temperature (NST) is reached.After cooling down to the reset temperature (RST), the switch returns to its original state.The reset temperature is typically 15 ... 30 K below the switching temperature.Contact designThe bimetal temperature switch type TFS135 is equipped with a normally closed contact.An NC contact (NC = Normally Closed) opens a circuit and switches off a machine.After cooling down below the reset temperature, the contact returns to its original state so that the monitored device can resume normal operation.

Contact 16 A - 400 V (AC1)Sensor 50 mm with 14x1 AGCapillary tube 1550 mm

Contact 16 A - 400 V (AC1)Sensor 50 mm with 3/8" AGCapillary tube 1550 mm