High-pressure cutting ring fittings

Here you will find elbow fittings, T-fittings, straight fittings
and reducers in stainless steel or galvanised steel.
Can't find what you're looking for?
Give us a call on 02255 958245 or by Mailanfrage

Stainless steel

Galvanised steel

High pressure hoses

SB pumps

Sorting

24° DIN compression fitting on female thread Stainless steel V4A 1.4571 / AISI 316 TI

24° DIN tube fittings (cutting ring system)Stainless steel V4A 1.4571 / AISI 316 TIType GAI, cone 24°Straight screw-on fittingScrew-on thread: Whitworth pipe thread cyl.The standard range of tube fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

From €24.49*

Details

24° DIN compression fitting Stainless steel V4A 1.4571 / AISI 316 TI Elbow fitting

24° DIN pipe fittings (cutting ring system) stainless steel V4A 1.4571 / AISI 316 TI type G, cone 24° elbow fitting (connector) The standard range of pipe fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

€30.63*

Details

24° DIN compression fitting stainless steel V4A 1.4571 / AISI 316 TI straight

24° DIN pipe fittings (cutting ring system) stainless steel V4A 1.4571 / AISI 316 TI type G, taper 24° straight fitting (connector) The standard range of pipe fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

From €16.57*

Details

24° DIN compression fitting Stainless steel V4A 1.4571 / AISI 316 TI T-piece

Content: 1 Piece

From €43.76*

Details

24° DIN cutting ring fitting galvanised steel

24° DIN pipe fittings (cutting ring system) steel ZnNi coating type T, cone 24° T fitting The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 92

Content: 1 Piece

From €13.11*

Details

24° DIN cutting ring fitting galvanised steel Connector

24° DIN pipe fittings (cutting ring system) steel ZnNi coating type G, cone 24° straight fitting The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227

Content: 1 Piece

From €5.90*

Details

24° DIN cutting ring fitting Galvanised steel Elbow

24° DIN pipe fittings (cutting ring system) steel ZnNi coating type W, cone 24° elbow fitting The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 92

Content: 1 Piece

From €9.31*

Details

24° DIN cutting ring fitting on external thread galvanised steel

Content: 1 Piece

From €3.10*

Details

24° DIN cutting ring fitting on female thread galvanised steel

24° DIN pipe fittings (cutting ring system) steel ZnNi coating type GAI, cone 24° straight threaded fitting The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227.

Content: 1 Piece

From €4.46*

Details

Adjustable 90° elbow fitting Galvanised steel

Content: 1 Piece

From €11.13*

Details

Adjustable 90° elbow fitting stainless steel

Content: 1 Piece

From €46.59*

Details

Adjustable L-fitting galvanised steel

Adjustable screw fitting24° DIN pipe fittings (cutting ring system)Steel ZnNi coatingType ELVDAdjustable L-fitting with 24° DKO sealing cone and cutting ring connection to DIN 2353 / DIN 3865 / EN ISO 8434-1 made of steel with sealing by NBR O-ring to ISO 3601The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227

Content: 1 Piece

From €18.96*

Details

Adjustable L-fitting stainless steel

Adjustable screw fitting24° DIN pipe fittings (cutting ring system)Stainless steel V4A 1.4571 / AISI 316 TIType ELVDAdjustable L-fitting with 24° DKO sealing cone and cutting ring connectionSealing with Viton O-ring to ISO 3601The standard range of tube fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

From €72.69*

Details

Adjustable screw-in fitting straight on AG galvanised steel

Adjustable screw fitting24° DIN pipe fittings (cutting ring system)Steel ZnNi coatingType EGVD-R-WDStraight adjustable 24° DKO sealing cone screw-in fitting with BSPP male thread soft-sealing according to DIN EN 3869 / EN ISO 8434-1 / DIN 3865 / DIN EN ISO 1179-2 made of steel with sealing by NBR O-ring according to ISO 3601The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227

Content: 1 Piece

From €7.74*

Details

Adjustable screw-in fitting straight to AG stainless steel

Adjustable screw fitting24° DIN pipe fittings (cutting ring system)Stainless steel V4A 1.4571 / AISI 316 TIType EGVD R WDStraight adjustable 24° DKO sealing cone screw-in fitting with BSPP male thread, soft-sealing.Sealed by Viton O-ring to ISO 3601The standard programme of pipe fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

From €30.94*

Details

Adjustable T-fitting Galvanised steel

Adjustable T-fitting24° DIN pipe fittings (cutting ring system)Steel ZnNi coatingType ETVDAdjustable T-fitting with 24° DKO sealing cone and cutting ring connection to DIN 2353 / DIN 3865 / EN ISO 8434-1 made of steel with sealing by NBR O-ring to ISO 3601The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227

Content: 1 Piece

From €18.84*

Details

Adjustable stainless steel T-fitting

Adjustable T-fitting24° DIN pipe fittings (cutting ring system)Stainless steel V4A 1.4571 / AISI 316 TIType ETVDAdjustable T-fitting with 24° DKO sealing cone and cutting ring connectionSealing with Viton O-ring to ISO 3601The standard range of tube fittings complies with DIN 2353, ISO 8434-1.

Content: 1 Piece

From €81.19*

Details

Cutting ring 10L/S galvanised steel

Content: 1 Piece

€1.01*

Cutting ring 12L/S galvanised steel

Content: 1 Piece

€1.04*

Stainless steel cutting ring

Content: 1 Piece

From €2.70*

Details

Angle screw connection galvanised steel

Content: 1 Piece

From €7.54*

Details

Lubricant Altemp Q NB50 80gr.

ALTEMP Q NB 50Lubricating and assembly pasteProduct informationALTEMP Q NB 50 is a lubricating paste based on mineral oil, barium complex soap and inorganic solid lubricants.In addition to its universal use for assembly purposes, this lubricating paste offers particular advantages at friction points for small and very small sliding movements under high static and dynamic loads.Advantages for your application: Lower lubricant costs for initial and relubrication due to long service life thanks to good water and media resistance Good wear and corrosion protection reduces press-in forces, screw torques etc. and prevents fretting and fretting corrosion High pressure absorption capacity enables constant clamping forces and thus fixation of the tools or workpieces in the chucks of the machine tool

Content: 1 Piece

€95.29*

Pipe socket EG galvanised steel

Content: 1 Piece

From €5.86*

Details

Reducing union straight galvanised steel

Adjustable reducer union24° DIN pipe fittings (cutting ring system)Steel ZnNi coatingType REDVStraight adjustable 24° DKO sealing cone reducer union with cutting ring connection to DIN 2353 / DIN 3865 / EN ISO 8434-1 made of steel with sealing by NBR O-ring to ISO 3601The optimised zinc-nickel coating exceeds corrosion protection values of > 1,200 hours against white rust. Tested in accordance with DIN EN ISO 9227

Content: 1 Piece

From €7.80*

Details

Interesting for you

High-pressure complete lance easywash365+ Swivel 600/300mm 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

15° angled easywash365+ jet pipes by SuttnerSpray wand 600mm with overmoulded insulation 300mm Cool & Compacteasywash365+ gun without frost protectionStainless steel jet pipeInsulation easywash365+ blueInlet: 3/8" IG swivellingOutlet: Nozzle protection ST-10 1/4 "IG-NPTMax. 310 bar / 150°CLTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €113.56*

€115.83*

High-pressure complete lance easywash365+ Swivel 800/410mm 1/4"/40040

Hose connection?: 1/4" | Nozzle size: 40040

15° angled easywash365+ spray lances by SuttnerSpray lance 800mm with overmoulded insulation 400mm Cool & Compact easywash365+ gun with weep frost protection Spray lance stainless steel rotatable Insulation easywash365+ blue Inlet: 3/8" IG rotatable Outlet: nozzle protection ST-10 1/4 "IG-NPT Max. 310 bar / 150°C LTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €114.73*

€123.30*

Complete lance Ecoline ST-28 900mm

Length?: 900mm

Length 500 or 900mm,ST-28 insulation,ST-10 nozzle protectionType: R+M EcoLine No. ONE professional high-pressure spray gunMax. 250 bar / 45 l/min / 150°CInlet: 3/8" IGOutlet: Spray wand ST-28 galvanised steelSpray wand insulation ST-28 Cool & CompactNozzle guard ST-10 1/4 "IG-NPT (without nozzle)

Content: 1 Piece

Variants from €52.84*

€56.87*

easywash365+ pre-spray lance 500mm 1/4" AG Nozzle selectable without

HD nozzle?: without

Stainless steel spray wand with easywash365+ handleNozzle guard ST-10 without nozzleMax. 350 bar / 45 l/min / 120°CLength 500 mmInlet: 1/4" AGOutlet: 1/4" IG-NPT

Content: 1 Piece

€50.97*

easywash365+ stainless steel high pressure lance 900mm

Easywash stainless steel high-pressure lance, jet pipe with overmoulded insulation. Ideal for Washing brushes. Connections: 2 x 1/4" external thread Total length: 900 mm Length of insulation: 700 mmMax. 400 bar / 150 °C

Content: 1 Piece

€42.22*

Foam lance easywash365+ ST-75 Version selectable 1/4" 1.05 without

Duesengroeße?: 1,05 | Antifreeze?: without | Hose connection?: 1/4"

Foam lance with easywash365+easywash365+ spray gun, selectable versionSpray wand with extension ST-9.1 245 mmFoam nozzle ST-75 1.9 mmMax. 310 bar / 25 l/min / 150 °CInlet: 3/8 "IG rotatable

Content: 1 Piece

€163.43*

HP lance complete for HP cleaner SB Weep ST-1500 Washtec Version Connection and nozzle 3/8" 40065

HD nozzle?: 40065 | Hose connection?: 3/8"

Ideal for use in self-service areas with frost protection function. consisting of: High-pressure gun ST-1100 Weep (permanent frost protection) rigid lance 800mm overmoulded Nozzle on request Hose connection on request Nozzle as required Hose connection as required On request max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

Variants from €51.00*

€57.00*

High pressure gun ST-2620 1/2 "IG ROTATABLE : HOSE

Suttner Professional high-pressure foam gun with patented LTF technology - Low Trigger Force 90% lower holding force and 40% lower trigger force compared to standard guns on the market.Inlet: 1/2" IG rotatableOutlet: insulated lance 300 mm and foam nozzle 9040Max. 125 bar / 80 l/min / 150°CArea of application e.g. foam applications in vehicle pre-cleaning. Suitable for low pressure due to PEEK sealing cone.

Content: 1 Piece

€150.75*

High-pressure lance complete for high-pressure cleaner Single 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

Ideal for use at self-service bays or in the pre-cleaning area. Consisting of: ST-1100 high-pressure gun Rigid lance 800mm overmoulded HD nozzle as required as required Hose connection n. as required max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

€41.00*

High-pressure lance easyturn ST-9.4 1/4 "AG SW/BL/SW, handle rotatable, length selectable 370mm

Length?: 370mm

Spray nozzle with overmoulded insulation, rotatableSwivelling insulation for ergonomic handling. The coloured handle elements can be freely rotated left,freely rotatable around their own axis on the left and right. Black handle elements are firmly fixed.Particularly suitable for the car wash sectorStainless steel designDesign: Cool & Compact insulation Handle elements (length 100 mm)Max. 400 bar / 150°C

Content: 1 Piece

€17.85*