Surface cleaners for tasks around the house

Surface cleaners are idealfor cleaning large areas. They are designed for the comprehensive cleaning of heavily soiled surfaces. Compared to manual cleaning, they enable much faster and often more thorough cleaning. Efficiency is one of the main reasons for using a professional surface cleaner.

Sorting

Brush ring for Turbodevil with suction unit

Content: 1 Piece

€27.06*

Complete set for roof cleaning max. 350 bar

Professional stainless steel Mosmatic High-pressure roof cleaner DR 520 in SET. Adjustable to fit any roof. Diameter 520 mm Connection M22 AG max. 350 bar 4 industrial rollers (125 mm). Max. 2400 l/h / 120 °C Completely stainless steel. Cleaner with additional frame for maximum stability. Height and width adjustment: max. 33 mm (height) & 90 mm (width). Includes a safety eyelet for attaching the safety rope with snap hook. We recommend the use of the ST-550 foot control. The set consists of: 1x DR 520 roof cleaner 1x ST-550 500 bar foot control 2x high pressure hose 15 metres Accessories such as high-pressure nozzles and adapters for your high-pressure cleaner.

Content: 1 Piece

€2,099.00*

Complete set for roof cleaning max. 500 bar

Professional stainless steel Mosmatic High-pressure roof cleaner DR 520 in SET. Adjustable to fit any roof. Diameter 520 mm Connection M22 AG max. 500 bar 4 industrial rollers (125 mm). Max. 2400 l/h / 120 °C Completely stainless steel. Cleaner with additional frame for maximum stability. Height and width adjustment: max. 33 mm (height) & 90 mm (width). Includes a safety eyelet for attaching the safety rope with snap hook. We recommend the use of the ST-550 foot control. The set consists of: 1x DR 520 roof cleaner 1x ST-550 500 bar foot control 2x high pressure hose 15 metres Accessories such as high-pressure nozzles and adapters for your high-pressure cleaner.

Content: 1 Piece

€2,199.00*

Complete set for surface cleaning max. 275 bar

Professional stainless steel TurboDevil surface cleaner in SET. Diameter 410 mm Connection KW plug nipple max. 275 bar The suction function allows residual water and residues to be extracted.Thewater can be reusedvia a separate recycling system.Completely rustproof designSafe handling all round thanks to heat-resistant protection against splashes and flying Steinen.Robot-welded, balanced and well-balanced precision rotor arm,equipped with directly welded nozzle holders.Guaranteed low-vibration, safe operation.Suitable for applications up to approx. 500 operating hours per year.Use of a ball-bearing swivel joint with carbide sealing elements for high durability and extremely long service life.Stainless steel swivel castors The set consists of:1x TD410SS surface cleaner1x ST-2600KW high-pressure gun1x 15 metre high-pressure hose1x high-pressure lance with flat jet nozzle1x high-pressure lance with dirt cutter

Content: 1 Piece

€1,599.00*

Floor scrubber ST-97 400 mm 1/4 AG stainless steel

Floor cleaner ST-97Inlet: 1/4" AGStainless steelInfinitely variable pressure regulationLow pressure phase for chemical suctionIncl. four nozzles 015 80° Width 400 mmMax. 250 bar / 21 l/min / 80°C

Content: 1 Piece

€825.50*

High-pressure slotted gutter cleaner 1/4 "IG 200 bar 90°C

Slot drain cleaner for clean linear drainage Robust stainless steel design. Centred guide roller for precise central use. Can be used centred or sideways for cleaning directly on steps or walls. A nozzle guard for the adapter is included in the scope of delivery. By using the adapter, you can quickly switch to high-pressure cleaning with the lance. The nozzle guard is quickly fitted and always ready to hand. Depending on requirements, the angle of the cleaning nozzle can be adjusted on the axis to reach the dirt even at the end of the channel. Outlet 1/4" IG-NPT Width 150 mm Pressure 200 bar Flow rate 20 l/min Nozzle without inlet 1/4" FEMALE THREAD manufacturer Suttner Height 150 mm Length 220 mm temperature 90 °C

Content: 1 Piece

€566.60*

High-pressure surface cleaner RC301VA 300mm M22 AG

Rotating surface cleaner with 3 industrial rollers ø 50 mm Stainless steel splash guard Adjustable guide handle Diameter 300 mm Incl. 2 nozzles 1/4" AG Max. 250 bar / 90 °C

Content: 1 Piece

€179.00*

High-pressure surface cleaner TD 520 Agriculture

High-pressure surface cleaner TD 520 Agriculture Diameter 520 mm Connection 1/4" IG max. 275 bar " Mobile floor cleaner with lance quiver for the high-pressure lance for extra cleaning in corners or on walls " Robust stainless steel design with reinforcements for the toughest operating conditions in agriculture " Front-mounted swivel castor in 30 mm width, ideal for travelling on slatted floors on slatted floors and enables simple and flexible steering " Connection to the swivel arm via a large swivel joint for a water flow of up to water flow of up to 1800 l/h " The sturdy guide bar is offset towards the rear enables easy manoeuvring under obstacles such as tables or fences " 2 very large rear tyres lined with foam allow the cleaner to be to pull the cleaner up stairs backwards without any problems " Gun and lance with nozzle are not included in the scope of delivery " 2 1/4" AG nozzles are required " Max. 1800 l/h / 120 °C

Content: 1 Piece

€1,431.77*

Mosmatic Chewing gum poly nozzle for FL-AHB KAU

Cleaning head can be fitted with up to 18 needle nozzles with a maximum operating pressure of 350 bar. The device is hand-held. The chewing gum remover can be used on smooth surfaces with cold or hot water up to 95 °C. Rough surfaces are cleaned with hot water at 85-95 °C.

Content: 1 Piece

€626.14*

Mosmatic FL-ABB 200 surface cleaner without gun

Diameter: 200 mmConnection: 1/4" IGMax. 350 bar / 120°CMin. 150 bar / 18 l/minSuction: 50 mmNozzle connection: 1/8" IGwithout gun, without nozzles (1/8)" Wall cleaner - graffiti with suction system" Areas of application: Graffiti removal, restoration of various surfaces, building maintenance and wherever cleaning is only possible with very high water pressure.can be cleaned" Suitable for outdoor applications such as concrete, brick, limestone masonry or wooden surfaces" Suitable for 50 mm suction hose" For fatigue-free work, we recommend using the gunST-2605 (202605500) with the patented LTF system" Cleaner is supplied without high-pressure gun and nozzles

Content: 1 Piece

€791.89*

Mosmatic FL-AHB KAU 520 surface cleaner complete with guns

with suction and chewing gum remover, hose + nozzleDiameter: 520 mmInlet: 3/8 "IGMax. 350 bar / 120°CMin. 250 bar / 15 l/min- Suitable for 50 mm suction hose. Supplied without suction hose.- To ensure precise removal of chewing gum, the special nozzle is fitted behind the stainless steel bonnet. The surface is cleaned conventionally by pressing the gun mounted on the right. For stubborn dirt such as chewing gum, the special nozzle is switched on with the gun mounted on the left. The high-pressure jets and the flat angle cut, loosen and vacuum the chewing gum." Thanks to four 100 mm plastic castors, the surface cleaner can be moved with ease." The frame and all attachments are made of stainless steel and provide additional stability. Best cleaning results are achieved thanks to a height-adjustable housing." Swivel joint with reinforced, self-lubricating stainless steel ball bearings and a carbide sealing system specially designed for high speeds. This combination promises a long service life." Complete with two ST-2605 high-pressure guns with patented Low Trigger Force technology, two 1/8" AG 15° 03 high-pressure nozzles and a special nozzle for removing chewing gum. Other nozzle sizes on request.

Content: 1 Piece

€4,473.15*

Mosmatic FL-EB 200 surface cleaner without gun

Diameter: 200 mmConnection: 1/4 "IGMax. 275 bar / 120 °CNozzle connection: 1/8 "IGwithout gun, without nozzles (1/8)" Wall cleaner - Economy" With this multifunctional surface cleaner, you are ideally equipped for any cleaning task, e.g. brick walls, boat walls, walkways, stairs, pavements, windows etc." For fatigue-free work, we recommend using the gunST-2605 (202605500) with the patented LTF system" Cleaner is supplied without high-pressure gun and nozzles

Content: 1 Piece

€580.10*

Mosmatic Gyro arm 470mm for CLASSIC-AIR-ROLLER 500bar

470mm lengthmax. 500 barfor 2 nozzles 1/8" NPT

Content: 1 Piece

€200.95*

Mosmatic HD Aqua 2 nozzle set for FL-SAR

for 10878243 (consists of 3 nozzles)With this conversion kit, the FL-SAR can be operated with100bar-8l/min to 150bar-10l/min,

Content: 1 Piece

€116.47*

Mosmatic High-pressure roof cleaner DR-520 cpl. 350 bar 3/8 "IG

Max. 2,400 l/h / 120°CDiameter 520 mmCompletely stainless steel.Cleaner with additional frame for maximum stability.Height and width adjustment: max. 33 mm (height) & 90 mm (width).2 nozzles with 1/4" AG are required.Includes a safety eyelet for attaching the safety rope with snap hook.We recommend the use of the ST-550 foot control.4 industrial castors (125 mm).

Content: 1 Piece

€2,137.83*

Mosmatic High-pressure roof cleaner DR-520 cpl. 500 bar 3/8 "IG

Content: 1 Piece

€2,376.30*

Mosmatic Surface cleaner FL-AER 300 3/8IG 275bar

Suction unit and 2 nozzles 1503Article no.: 10878242Max. 275 bar / 120°CInlet: 3/8" IGCompletely stainless steel.Suction system suitable for 50 mm suction hose.3 swivel castors (60 mm).

Content: 1 Piece

€1,226.50*

Mosmatic Surface cleaner FL-AER 410 3/8IG 275bar

Suction unit and 2 nozzles 1503Max. 275 bar / 120°CInlet: 3/8" IGCompletely stainless steel.Suction system suitable for 50 mm suction hose.3 swivel castors (60 mm).

Content: 1 Piece

€1,670.62*

Mosmatic Surface cleaner FL-AH 520 3/8IG 350bar

FL-AH520 - Surface cleaner with suction function (Ø50mm) Ø520mm - 350 bar - max 120°C - 3/8" IG - Rotor arm 2 x 1/8" NPT IGNozzle 2 x 15030 with brush ring, swivel castors and gun

Content: 1 Piece

€2,928.12*

Mosmatic Surface cleaner FL-AHY 520 G¼" max. 500bar

FL-AHY520 - Surface cleaner with suction function (Ø50mm)Ø520mm - 500 bar - max 120°C - 1/4" AG - rotor arm 2 x 1/8" NPT IG with brush ring, swivel castors - without gun and nozzles

Content: 1 Piece

€2,799.21*

Mosmatic Surface cleaner FL-SAR 300 3/8IG:2x1/8 275bar

with self-suction, with gun + nozzlesArticle no.: 10878243Surface cleaner AQUA with suctionDiameter: 300mmInlet: 3/8"Max. 275 bar / 120 °CSuction: 40 mmComplete with gun and nozzlesdesigned for 150 bar / 15 l/min. Can be converted with 10878983Integrated self-suctionThe black anodised aluminium suction unit sucks up the dirty water through theVenturi principle and via the double housing system. It can then be be led away via a standard suction hose. No additional industrial vacuum cleaner is required.

Content: 1 Piece

€1,621.28*

Mosmatic Surface cleaner FL-SAR 520 3/8IG:2x1/8 350bar

The new Mosmatic Aqua Pro with integrated suction. This surface cleaner no longer requires an external industrial vacuum cleaner. Thanks to the Venturi nozzle attached to the housing, the waste water is discharged solely via a standard hose. The Aqua Pro can clean and vacuum or both at the same time. with 2 guns + 2 nozzles 1503 + self-suction DN40mm Max. 350 bar / 120°C Inlet: 3/8" IG Diameter 520 mm Material completely stainless steel 4 stainless steel rollers (100 mm) Integrated self-suction The black anodised aluminium suction unit sucks up the dirty water using the Venturi principle and the double housing system. It can then be removed via a standard suction hose. No additional industrial vacuum cleaner is required.

Content: 1 Piece

€4,116.91*

Mosmatic Turbo gyro arm 470 mm inlet 3/8" outlet 2x1/4" 500bar

Content: 1 Piece

€238.82*

RC160VA Surface cleaner M22AG

Turbodevil wall cleaner WW160Rotating wall cleaner with extra small operating radiusStainless steel splash guard with brush stripsSplash guard 160 mm with brush stripsWithout nozzles. 2 nozzles 1/4" AG-BSP with 15° spray angle are requiredMax. 350 bar / 90°C

Content: 1 Piece

€268.43*