Mini pipe cleaning nozzle
M7 FEMALE THREAD. 3 holes to the rear for optimum
propulsion. Additional 3 lateral holes (90°)
for high impact forces and optimum wall
wall cover. Outside 9.8 mm.
Stainless steel. Max. 500 bar
Heat exchangers in combined heat and power plants or conveyor pipes in the food
food industry are often pipes with a diameter of 10 to
of 10 to 12 mm. To effectively clean the inside of these pipes of residues and
deposits, pipe cleaning devices with small diameters and high permissible pressures are required.
small diameters and high permissible pressures. With a
diameter of just 9.8 mm, it can withstand working pressures of up to
500 bar. In combination with our R+M 1 / bronze hose
(304 20), the working pressure is max. 300 bar and 100° C
High-pressure pipe cleaning nozzle 1/2" AG 080
Inlet: 1/2" AG
Outer diameter 25 mm.
Stainless steel.
Nozzle size 080 Max. 500 bar / 40 l/min.
Extra compact, heavy-duty design with three holes to the rear.
For standard flushing and cleaning applications.
High-pressure pipe cleaning nozzle 1/2" AG 090
Inlet: 1/2" AG
Outer diameter 24.2 mm.
Stainless steel.
Nozzle size 080 Max. 500 bar / 45 l/min.
Pipe cleaning nozzle for standard applications. 4 holes at the rear (30°)
for good pulling effect. Conical tip for narrow pipe bends and protrusions.
High-pressure pipe cleaning nozzle 1/4" AG 035
Inlet: 1/4" AG
Outer diameter 15 mm.
Brass.
Nozzle size 035 Max. 210 bar / 16 l/min.
Particularly suitable due to the conical design,
to find its way through narrow and
through narrow and offset pipework.
Ideal for use on hobby and semi-professional appliances.
appliances.
3 holes to the rear for optimum propulsion.
Nozzle holes recessed for protection against
mechanical stress.
High-pressure pipe cleaning nozzle 1/4" AG 040
Inlet: 1/4" AG
Outer diameter 15 mm.
Stainless steel.
Nozzle size 040 Max. 350 bar / 17 l/min.
Particularly suitable due to the conical design,
to find its way through narrow and
through narrow and offset pipework.
3 holes to the rear for optimum propulsion
and high impact force. Front hole for
breaking through blockages or de-icing.
Nozzle bores recessed for optimum protection
against mechanical stress
High-pressure pipe cleaning nozzle 1/4" FEMALE THREAD 045
Inlet: 1/4" female thread
Outer diameter 22 mm.
Hardened stainless steel.
Nozzle size 045 Max. 500 bar / 25 l/min.
Due to the conical design
particularly suitable for
through narrow and offset pipework.
through narrow and offset pipework.
3 holes to the rear for
optimum propulsion and powerful
cleaning.
Front bore for breaking through
blockages or de-icing.
High-pressure pipe cleaning nozzle 1/4" FEMALE THREAD 050
Inlet: 1/4" female thread
Outer diameter 22 mm.
Hardened stainless steel.
Nozzle size 045 Max. 500 bar / 30 l/min.
Due to the extremely short design
particularly suitable for narrow
pipe bends.
3 holes to the rear for optimum
optimum propulsion and powerful
cleaning.
Front hole for breaking through
of blockages or de-icing.
High-pressure pipe cleaning nozzle 1/4" FEMALE THREAD 060
Inlet: 1/4" female thread
Outer diameter 22 mm.
Hardened stainless steel.
Nozzle size 060 Max. 500 bar / 30 l/min.
Due to the extremely short design
particularly suitable for narrow
pipe bends.
6 holes to the rear for optimum
optimum propulsion and best
wall cover.
High-pressure pipe cleaning nozzle 1/8" IG 035
Inlet: 1/8" female thread
Outer diameter 15 mm.
Hardened stainless steel
Nozzle size 035 Max. 500 bar / 17 l/min.
Due to the extremely short design
particularly suitable for narrow
pipe bends and difficult to access
inlets.
3 holes to the rear for
optimum propulsion and powerful
cleaning.
Front hole for breaking through
blockages or de-icing.
High-pressure pipe cleaning nozzle 3/8" AG 060
Inlet: 3/8" AG
Outer diameter 15 mm.
Stainless steel.
Nozzle size 060 Max. 350 bar / 25 l/min.
Particularly suitable due to the conical design,
to find its way through narrow and
through narrow and offset pipework.
8 holes to the rear for optimum propulsion
and good wall coverage.
Front hole for breaking through blockages
or de-icing. Nozzle holes recessed
for optimum protection against mechanical
mechanical stress.
High-pressure pipe cleaning nozzle Grease Ball 1/4" FEMALE THREAD 080
Inlet: 1/4" female thread
Hardened stainless steel.
Nozzle size 080 Max. 500 bar
8 holes 0.6 mm to the rear for maximum propulsion and ideal lateral
lateral covering of the inner pipe wall surfaces. Particularly suitable for
oily and greasy soiling and root ingrowth.
Completely spherical nozzle holes recessed for optimum protection against
against mechanical stress.
High-pressure pipe cleaning nozzle Root rat 1/4" INTERNAL THREAD 060
Inlet: 1/4" female thread Hardened stainless steel. Nozzle size 060 Max. 500 bar / 30 l/min
Equipped with 3 holes to the rear (30°) for maximum propulsion and 3 further holes (45°) directly behind the tip for optimum cleaning results. cleaning result, the nozzle is particularly suitable for removing ingrown roots.
High-pressure rotary pipe cleaning nozzle ST-49 without front bore
Inlet: 1/4" female thread - outer diameter 19mm
Nozzle with pulling action. Very good for cleaning pipes and their their cross connections.
Applications:
" Removal of deposits " Cleaning grease and oil-based soiling " Cleaning of heat exchangers
High-pressure mini-rotary pipe cleaning nozzle ST-49.3 without front bore
Inlet: 1/8" female thread - outer diameter 12mm Max. 500 bar
Nozzle with pulling action. Very good for cleaning pipes and their and their cross connections. 2 radial jets (90°) to the pipe wall for optimum cleaning result. 2 rotating jets to the rear (45°) to generate to generate the thrust and to rinse out the loosened material. For pipes from 14-50 mm. Hardened stainless steel. Max. 500 bar
Applications: " Removal of deposits " Cleaning of greasy and oily soiling soiling " Cleaning of heat exchangers
High-pressure rotary pipe cleaning nozzle ST-49 without front bore
Inlet: 1/8" female thread - outer diameter 19mm
Nozzle with pulling action. Very good for cleaning pipes and their their cross connections.
Applications:
" Removal of deposits " Cleaning grease and oil-based soiling " Cleaning of heat exchangers
High-pressure rotary pipe cleaning nozzle ST-49 without front bore
Inlet: 3/8" female thread - outer diameter 19mm
Nozzle with pulling action. Very good for cleaning pipes and their their cross connections.
Applications:
" Removal of deposits " Cleaning grease and oil-based soiling " Cleaning of heat exchangers
High-pressure rotary pipe cleaning nozzle ST-49 with front bore
Inlet: 3/8" female thread - outside diameter 24mm
Nozzle with pulling action. Very good for cleaning pipes and their their cross connections.
Applications:
" Removal of deposits " Cleaning grease and oil-based soiling " Cleaning of heat exchangers
Suttner Pipe cleaning nozzle ST-49
3x to the rear
1x to the front
Inlet: 1/4" female thread
Diameter 19 mm
Nozzles with front bore
Stainless steel material
Cleaning of blocked pipes.
With centred front bore and 3 jets to the rear (45°).
Front jet for removing blockages or de-icing pipework. Jets to the rear for propelling and flushing out loosened material.
3x0.7 mm at the rearSuttner Pipe cleaning nozzle ST-49 Inlet: 1/4" female thread diameter 19 mm Nozzles without front bore With 3 or 4 jets to the rear (30°) for optimum propulsion and for flushing out loosened material Material stainless steel
Suttner Pipe cleaning nozzle ST-49Inlet: 1/8" female threadDiameter 15 mmNozzles with front boreMaterial stainless steelCleaning of clogged pipes.With centred front bore and 3 or 4 jets to the rear (45°).Front jet for removing blockages or de-icing pipework. Jets to the rear for propelling and flushing out the loosened material.
Suttner Pipe cleaning nozzle ST-49Inlet: 1/8" female threadDiameter 15 mmNozzles without front boreWith 3 or 4 jets to the rear (30°) for optimum propulsion and for flushing out the loosened materialStainless steel material
High-pressure stainless steel pipe cleaning nozzle ST-49 with front bore
Inlet: 3/8" IG
Cleaning of clogged pipes. With centred front bore and 3 or 4 jets to the rear (30°). Front jet for removing blockages or de-icing pipes. pipework. Jets to the rear for propulsion and for flushing out the loosened material.
Particularly robust and wear-free, made of hardened stainless steel. Nozzle guard made of plastic in the signal colour red.All nozzles are fitted with hardened stainless steel inserts. Thisefficiency is increased enormously compared to directly drilled nozzles.3 lateral front jets with 15° and one front jet.Ideal for excavations:- Areas with access problems- Safe removal of contaminated material- 50 per cent faster than conventional manual excavationsThe digging nozzle is fast and effective in all geological areas.