Products especially for use in self-service car washes

Pressure accumulatorCapacity 0.07 litresMax. 80°CInlet M14x1.5 AGPressure 15 - 200 bar

Capacity 0.21 litresMax. 85°CPressure 25 - 220 bar

1-Ear hose clamps are fitted by pinching with clamping pliers and can only be released by pinching open with a side cutter.The clamp is not reusable and comes with a pre-assembled bearing ring.This bearing ring ensures an absolutely secure all-round fastening.The clamp is preferably used when fitting soft and sensitive hoses.In the case of very hard hoses, the bearing ring ensures all-round clamping.Material: Stainless steel

1-Ear hose clamps are fitted by pinching with clamping pliers and can only be released by pinching open with a side cutter.The clamp is not reusable and comes with a pre-assembled bearing ring.This bearing ring ensures an absolutely secure all-round fastening.The clamp is preferably used when fitting soft and sensitive hoses.In the case of very hard hoses, the bearing ring ensures all-round clamping.Material: Stainless steel

for easywash365+ ceiling tops

E: 3/8 "AG-NPT A:3/8 "AG-NPT Bypass:3/8 "IG-NPT

Easywash brush container with overflow and side drain plug for cleaning. Wall and floor mounting in self-service car washes H x W x D 670 x 340 x 143 mm

Two-part stainless steel brush container with cleaning slot. Floor mounting for different washing brush lengths. Holder: H x W x D: 315 x 305 x 120 mm. Holder tube: Tube Ø 42 mm, height-adjustable from 570 mm to 1,000 mm Material: Stainless steel

easywash365+ stainless steel pre-wash trolleyIdeal for the pre-wash area in car washes.Carriage and tub made entirely of stainless steel.Ready-to-connect system:Only needs to be connected to the water pipe. Including ST-45 inlet coupling (hose nozzle with plug-in nipple for 1/2" DN 13 or 3/4" DN 19) anddrain tap on the underside (with grommet for DN 13)The water and detergent supply is automatically closed or opened by a float valve.The detergent can be dosed using the various dosing nozzles supplied.Two separate holding areas for different brushes:(hand washing brushes Brushes with long handle)High-quality tyres made of abrasion-resistant materialReceptacle for detergent canisters up to - 30 litres

Flex brush lance. No more washing without inserting a coin!Length of jet pipe 1,000 mm with 800 mm insulationMax. 50 °CInlet: 1/4" AGHP = 20 - 80 bar, min. 9 l/minFlex mechanism: The Flex brush lance offers an additional functioncompared to all known standard brush lances. A mechanism is installed directly in front of the brush head that causes the brush head to slacken when there is no pressure.The Flex brush lance is activated for use by the water pressure alone. This is done by a bolt moving forwards. As soon as the pressure is interrupted, the pin moves back to its original position and the entire brush head collapses.

Flex brush lance. No more washing without inserting a coin!Length of jet pipe 1,000 mm with 800 mm insulationMax. 50 °CInlet: 1/4" AGND = 2.5 - 20 bar, min. 5 l/minFlex mechanism: The Flex brush lance offers an additional functioncompared to all known standard brush lances. A mechanism is installed directly in front of the brush head that causes the brush head to slacken when there is no pressure.The Flex brush lance is activated for use by the water pressure alone. This is done by a bolt moving forwards. As soon as the pressure is interrupted, the pin moves back to its original position and the entire brush head collapses.

Type: CarwashComfortNominal diameter: DN06Max. 200 bar / 60 °CColour: blueConnection: EGR 3/8"Connection: EGR 3/8"

Type: CarwashComfortNominal diameter: DN06Max. 200 bar / 60°CColour: blueConnection 1: DKO M22x1.5Connection 2: DKO M22x1.5

Type: DN06Max. 200 bar / 60 °CColour: blueConnection: DKOL 14x1.5 (sealing cone)Connection: DKOL 14x1.5 (sealing cone)

Type: Carwash ComfortNominal diameter: DN06Max. 200 bar / 60 °CColour: blueConnection: DKOL 18x1.5 (sealing cone)Connection: DKOL 18x1.5 (sealing cone)

Type: Carwash ComfortNominal diameter: DN06Max. 200 bar / 60 °CColour: blueConnection: DKR 3/8" (sealing cone)Connection: DKR 3/8" (sealing cone)

Type: DN06Max. 200 bar / 60 °CColour: greenConnection: DKOL 14x1.5 (sealing cone)Connection: DKOL 14x1.5 (sealing cone)

Type: DN06Max. 200 bar / 60 °CColour: greenConnection: DKOL 18x1.5 (sealing cone)Connection: DKOL 18x1.5 (sealing cone)

Type: Carwash ComfortNominal diameter: DN06Max. 200 bar / 60 °CColour: greenConnection: DKR 3/8" (sealing cone)Connection: DKR 3/8" (sealing cone)

CARWASH COMFORT - the hose miracle for self-service car washes. Type: DN08 Max. 200 bar / 60 °C Colour: green Connection: EGR 3/8" Connection: EGR 3/8" " High ease of use in combination with spraying equipment, e.g. brush lance. " Low weight, 92 g/m at DN 6. Significantly less than half the weight of a conventional SB hose. " Chemical-resistant, smooth inner core made of PES. " Transparent outer cover made of thermoplastic elastomer, depending on colour: CCBL, CCRT, CCGR, CCGE, CCGN. " Resistant to oil, UV, ozone and weathering. " Flexible at low temperatures: temperature range from -40 °C - +60 °C, -40 °F - +140 °F. " High tensile strength polyester reinforcement, " Outer diameter 15 mm for DN 8. " Burst pressure > 800 bar, 4-fold safety against bursting.

Type: CarwashComfortNominal diameter: DN06Max. 200 bar / 60°CColour: blueConnection 1: DKO M22x1.5Connection 2: DKO M22x1.5Material: Galvanised steel nipple, brass union nut.