Stationary equipment for self-service car washes

Here you will find equipment such as wall and ceiling gyroscopes, lance quivers, lance holders, washing brush containers, mat beaters, wheel washers, accessories for suction systems and much more.
Can't find what you're looking for?

Give us a call on 02255 958245 or via Mailanfrage

Wall and ceiling gyroscopes

Wall gyroscopes and ceiling gyroscopes

To the category

Self-service equipment

Everything in the area of self-service equipment

To the category

Self-service suction systems

Everything in the area of self-service suction systems

To the category

Wheel washer

Everything in the wheel washer sector

To the category

Sorting

Angled swivel joint 3/8IG-NPT:1/4AG

for easywash365+ ceiling tops

Content: 1 Piece

€101.76*

Brush container easywash365+ stainless steel

Easywash brush container with overflow and side drain plug for cleaning. Wall and floor mounting in self-service car washes H x W x D 670 x 340 x 143 mm

Content: 1 Piece

€459.17*

Brush container easywash365+ stainless steel 2 parts

Two-part stainless steel brush container with cleaning slot. Floor mounting for different washing brush lengths. Holder: H x W x D: 315 x 305 x 120 mm. Holder tube: Tube Ø 42 mm, height-adjustable from 570 mm to 1,000 mm Material: Stainless steel

Content: 1 Piece

€472.32*

Brush holder easywash365+ Mobile stainless steel

easywash365+ stainless steel pre-wash trolleyIdeal for the pre-wash area in car washes.Carriage and tub made entirely of stainless steel.Ready-to-connect system:Only needs to be connected to the water pipe. Including ST-45 inlet coupling (hose nozzle with plug-in nipple for 1/2" DN 13 or 3/4" DN 19) anddrain tap on the underside (with grommet for DN 13)The water and detergent supply is automatically closed or opened by a float valve.The detergent can be dosed using the various dosing nozzles supplied.Two separate holding areas for different brushes:(hand washing brushes Brushes with long handle)High-quality tyres made of abrasion-resistant materialReceptacle for detergent canisters up to - 30 litres

Content: 1 Piece

€1,589.03*

Ceiling gyro P LED 1750 stainless steel pol.1/4

Mosmatic LED high-pressure ceiling gyroMaterial: Polished stainless steelLength: 1750 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 10.2 kgMax. 275 bar / 90 °CVoltage. 24 VLight intensity: 120 lxProtection class: IP66Ceiling gyro with ball-bearing pivot point.Maintenance-free.Connection with swivel joint." Customised and effective" Visualisation of the wash programme" Additional lighting of the wash box" Stand out from the competitionThe world first for the self-service wash bay. The ceiling gyro with LED can be used to visualise the wash programme, for example. It is not only an eye-catcher for self-service systems, but also provides additional lighting for the self-service box. Due to the electronics, this product must be installed with particular care and by a specialist with the appropriate expertise.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Content: 1 Piece

€2,208.53*

Ceiling gyro positioning DK 60mm

Positioner with magnet. The positioner ensures that theMosmatic Z ceiling gyro is parked in a predefined position.

Content: 1 Piece

€262.62*

Ceiling gyro Z easywash365+ 1550 mm

easywash365+ ceiling gyroscope Stainless steel. Ready for installation with 2 integrated quality swivel joints, professional high-pressure hose with strain relief spring and integrated kink protection. Axle with 2 bearings and permanently lubricated. Max. 275 bar / 90 °C. Connections: 1/4IG-AG Length: 1550mm

Content: 1 Piece

€886.75*

Ceiling gyro Z easywash365+ 1550 mm with suspension

easywash365+ ceiling gyroscope with suspension Stainless steel. Ready for installation with 2 integrated quality swivel joints, professional high-pressure hose with strain relief spring and integrated kink protection. Axle with 2 bearings and permanently lubricated. Max. 275 bar / 90 °C. Connections: 1/4IG-AGLength: 1550mm

Content: 1 Piece

€957.85*

Ceiling gyro Z LED 1550 mm stainless steel pol.

Mosmatic LED high-pressure ceiling gyro ZMaterial: Polished stainless steelLength: 1550 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 10.2 kgMax. 275 bar / 90 °CVoltage. 24 VLight intensity: 120 lxProtection class: IP66Ready for installation with 2 integrated quality swivel joints.Especially suitable for the use of 2 ceiling gyroscopes next to each other.High-pressure hose with insulation." Customised and effective" Visualisation of the wash programme" Additional lighting of the wash box" Stand out from the competitionThe world first for the self-service wash bay. The ceiling gyro with LED can be used to visualise the wash programme, for example. It is not only an eye-catcher for self-service systems, but also provides additional lighting for the self-service box. Due to the electronics, this product must be installed with particular care and by a specialist with the appropriate expertise.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Content: 1 Piece

€2,404.19*

Ceiling gyroscope easywash365+ 1750 mm

Content: 1 Piece

€858.27*

Cleaning head TRS-3/8 "IG

The cleaning fluid drives the cleaning head by means of specially aligned nozzles due to its recoil force. The alignment of the nozzles keeps the speed in an optimum range, even over large pressure ranges, and the nozzles thus achieve a high spraying power and range.Made entirely of stainless steel, with swivel joint DYT.Supplied without nozzles. 4 point jet nozzle mouthpieces are required.

Content: 1 Piece

€1,350.51*

Crevice nozzle holder 1 compartment 45 mm stainless steel

Crevice nozzle holder for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Content: 1 Piece

€152.40*

Crevice nozzle holder 1 compartment 58 mm stainless steel

Content: 1 Piece

€153.59*

Crevice nozzle stand with holder 1 compartment 45 mm

Crevice nozzle holder on column for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Content: 1 Piece

€406.25*

Crevice nozzle stand with holder 1 compartment 58 mm

Content: 1 Piece

€407.44*

Crevice nozzle stand with holder 2 compartment 45 mm

Dual crevice nozzle holder on pillar for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Sturdy and expandable Attractive design Extremely robust and stable Stainless steel design, polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Content: 1 Piece

€655.30*

Crevice nozzle stand with holder 2 compartment 58 mm

Content: 1 Piece

€657.67*

Double ceiling gyro Z easywash365+ 1450/1550 mm Inlet 1/4 "IG Outlet 1/4 "AG

Material: Stainless steelLength: 1450 / 1550 mmone arm for high pressure and the other for low pressureInlet: 1/4 "IGOutlet: 1/4 "AGMax. 275 bar / 90 °CReady for installation with 3 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Content: 1 Piece

€1,800.05*

Stainless steel double ceiling gyroscope available in 4 different lengths 2500/3000mm

Length?: 2500/3000mm

The flexible double swivel arm from MTM with two springs is made of stainless steel and is available in 4 different versions with different lengths.Material: Stainless steelLength: 1600/1750 mm, 1750/2000mm, 2000/2500mm or 2500/3000mmInlet: 1/4 "IGOutlet: 3/8 "AGWeight: 13.5 kgMax. 210 bar / 90 °CReady for installation with 2 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Content: 1 Piece

Variants from €1,159.00*

€1,799.00*

Double-deck gyroscope-F easywash365+ 1600/1750 mm

easywash365+ ceiling gyroscope with springMaterial: Stainless steelLength: 1600 / 1750 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 13.5 kgMax. 275 bar / 90 °CReady for installation with 2 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Content: 1 Piece

€2,034.31*

Drawer for mat beater easywash365+ steel/galvanised

Drawer for easywash365+ mat beater WxHxD : 49x22x34,5cm

Content: 1 Piece

€225.00*

easywash365+ counter plate for wall-mounted swivel bracket

easywash365+ Counter plate for wall-mounted swivel bracket Stainless steel, thickness 10 mm for secure mounting

Content: 1 Piece

€350.81*

easywash365+ High-pressure wall and ceiling gyro 1600 - 2500mm

High-pressure ceiling gyroscope incl. High-pressure hose For mounting on the wall or ceiling Ideal for self-service systems or pre-wash stations " Wall or ceiling mounting " Incl. high-pressure hose DN 8, black " Ceiling swivel 360° swivelling, 180° swivelling for wall mounting " Ball bearing mounted pivot point " Total length up to 2500 mm " Max. 275 bar / 120 °C " Connection: 3/8" AG " Material: stainless steel

Content: 1 Piece

From €838.37*

Details

easywash365+ suction swivel arm for self-service suction stations, System50

Suction swivel arm for self-service suction stations Novelty for self-service suction stations " completely made of stainless steel " solid construction " spring-loaded Attention: The suction hose is not included in the scope of delivery. The vertical easywash365+ suction swivel arm for self-service suction stations! This cost-effective solution is ideal for individual suction stations. The arm does not necessarily have to be integrated into the technology cabinet cabinet, but can simply be mounted on a wall. Perfect when space is at a premium, because thanks to its design, this gyroscope takes up design, this gyroscope takes up little space and yet offers plenty of manoeuvrability. The built-in spring prevents the suction hose from kinking and enables enables barrier-free handling with optimum freedom of movement. The vertical easywash365+ suction swivel arm is made entirely of stainless steel and is supplied with a mounting bracket. Height 2320 mm. Tube height 1500 mm. Tube inner diameter 65 mm. Weight 10.1 kg

Content: 1 Piece

€624.50*

Interesting for you

High-pressure complete lance easywash365+ Swivel 600/300mm 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

15° angled easywash365+ jet pipes by SuttnerSpray wand 600mm with overmoulded insulation 300mm Cool & Compacteasywash365+ gun without frost protectionStainless steel jet pipeInsulation easywash365+ blueInlet: 3/8" IG swivellingOutlet: Nozzle protection ST-10 1/4 "IG-NPTMax. 310 bar / 150°CLTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €113.56*

€115.83*

High-pressure complete lance easywash365+ Swivel 800/410mm 1/4"/40040

Hose connection?: 1/4" | Nozzle size: 40040

15° angled easywash365+ spray lances by SuttnerSpray lance 800mm with overmoulded insulation 400mm Cool & Compact easywash365+ gun with weep frost protection Spray lance stainless steel rotatable Insulation easywash365+ blue Inlet: 3/8" IG rotatable Outlet: nozzle protection ST-10 1/4 "IG-NPT Max. 310 bar / 150°C LTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €114.73*

€123.30*

Complete lance Ecoline ST-28 900mm

Length?: 900mm

Length 500 or 900mm,ST-28 insulation,ST-10 nozzle protectionType: R+M EcoLine No. ONE professional high-pressure spray gunMax. 250 bar / 45 l/min / 150°CInlet: 3/8" IGOutlet: Spray wand ST-28 galvanised steelSpray wand insulation ST-28 Cool & CompactNozzle guard ST-10 1/4 "IG-NPT (without nozzle)

Content: 1 Piece

Variants from €52.84*

€56.87*

easywash365+ pre-spray lance 500mm 1/4" AG Nozzle selectable without

HD nozzle?: without

Stainless steel spray wand with easywash365+ handleNozzle guard ST-10 without nozzleMax. 350 bar / 45 l/min / 120°CLength 500 mmInlet: 1/4" AGOutlet: 1/4" IG-NPT

Content: 1 Piece

€50.97*

easywash365+ stainless steel high pressure lance 900mm

Easywash stainless steel high-pressure lance, jet pipe with overmoulded insulation. Ideal for Washing brushes. Connections: 2 x 1/4" external thread Total length: 900 mm Length of insulation: 700 mmMax. 400 bar / 150 °C

Content: 1 Piece

€42.22*

Foam lance easywash365+ ST-75 Version selectable 1/4" 1.05 without

Duesengroeße?: 1,05 | Antifreeze?: without | Hose connection?: 1/4"

Foam lance with easywash365+easywash365+ spray gun, selectable versionSpray wand with extension ST-9.1 245 mmFoam nozzle ST-75 1.9 mmMax. 310 bar / 25 l/min / 150 °CInlet: 3/8 "IG rotatable

Content: 1 Piece

€163.43*

Foam lance ST-75-1.9 St-1500 Weep without

Foam lance ST-75-1.9 St-1500 Weep M16

Hose connection?: M16

Foam lance also suitable for Washtec SB systems Gun ST-1500Weep Spray wand with extension 333 mm Foam nozzle ST-75 1.9 mm Max. 310 bar / 25 l/min / 150 °C Inlet: 3/8 "IG

Content: 1 Piece

Variants from €173.33*

€176.19*

HP lance complete for HP cleaner SB Weep ST-1500 Washtec Version Connection and nozzle 3/8" 40065

HD nozzle?: 40065 | Hose connection?: 3/8"

Ideal for use in self-service areas with frost protection function. consisting of: High-pressure gun ST-1100 Weep (permanent frost protection) rigid lance 800mm overmoulded Nozzle on request Hose connection on request Nozzle as required Hose connection as required On request max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

Variants from €67.00*

€73.00*

High pressure gun ST-2620 1/2 "IG ROTATABLE : HOSE

Suttner Professional high-pressure foam gun with patented LTF technology - Low Trigger Force 90% lower holding force and 40% lower trigger force compared to standard guns on the market.Inlet: 1/2" IG rotatableOutlet: insulated lance 300 mm and foam nozzle 9040Max. 125 bar / 80 l/min / 150°CArea of application e.g. foam applications in vehicle pre-cleaning. Suitable for low pressure due to PEEK sealing cone.

Content: 1 Piece

€150.75*

High-pressure lance complete for high-pressure cleaner Single 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

Ideal for use at self-service bays or in the pre-cleaning area. Consisting of: ST-1100 high-pressure gun Rigid lance 800mm overmoulded HD nozzle as required as required Hose connection n. as required max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

€41.00*