Low pressure valve technology

2/2 WAY SOLENOID VALVE Function: normally closed (NC) Seal: NBR Thread: G 1/2" DN [mm]: 13.0 L [mm]: 67 Working pressure [bar]: 0.3 - 16 kv value* [l/min]: 63.0 Voltages: 24VDC, 24VAC and 230VAC

2/2-waysolenoid valves3/8" DN8mm Materials: Body: brass, internal parts: Brass / stainless steel Seal: NBR Temperature range: -10°C to max. +80°C (ambient max +50°C) Media: Compressed air, neutral gases, water, neutral low-viscosity media Operating voltage: 230 V 50 / 60 Hz Protection class: IP 65

Ballast screw connection for attaching the ST-8 float to the water tank.

EggemannTube diffuser DN 20Safety device type HBvertical installationFor self-protection against backflow in accordance with DIN 1988.100 and DIN EN 1717To prevent cleaning agent from entering the drinking water circuit in the event of overpressure in the water pipe. Required for direct pipe connection to the pump.Chrome-plated brass Technische Daten Surface finish chrome Nominal diameter DN 20 length 64 mm size Grohe Eggemann Inlet 3/4" FEMALE THREAD Outlet 3/4" MALE

Low pressure ball valve 1/4" to 1" max. 25 bar Material: Nickel-plated brass. Ball chrome-plated. Max. 25 bar Max. 60°C

2-way ball valve with threaded connectionMaterial:Body stainless steel V2A / AISI 304Stainless steel ballMax. 60 °C

2-way ball valve with threaded connectionMaterial:Body stainless steel V4A / AISI 316Stainless steel ballBall seal POMMax. 100 °C

2-way ball valve with threaded connectionMaterial:Galvanised steel bodyBall chrome-platedBall seal POMO-rings NBRMax. 80 °C

2-way ball valve with threaded connectionNickel-plated brass bodyBall chrome-platedMax. 210 bar / 80°CInlet: 3/8" or 1/2" female threadOutlet: 3/8" or 1/2" female threadWidth (size 1) 30 mmLength (size 2) 75 mm

.

0.5 bar - 1 l/min - max 60°C - 1 x pump suction - 2 x chemical suction 7mm

With non-return valveFor panel mountingColour: BlackS = Pump suctionS1 = Chemical suction 1S2 = Chemical suction 2The ST-66 can be used to control the chemical flow from the injector.With two inputs, it is also possible to switch from one chemical to the next. Simply turn the rotary knob to the desired side and set the desired dosage using the easy-to-read scale.

With non-return valveFor panel mountingColour: redS = Pump suctionS1 = Chemical suction 1S2 = Chemical suction 2The ST-66 can be used to control the chemical flow from the injector.With two inputs, it is also possible to switch from one chemical to the next. Simply turn the rotary knob to the desired side and set the desired dosage using the easy-to-read scale.

For switch panel installationColour: BlackWithout adjustment knobS = Pump suctionS1 = Chemical suction 1S2 = Chemical suction 2The ST-66 can be used to control the chemical flow from the injector.With two inputs, it is also possible to switch from one chemical to the next.

AK float valve with PE floatPressure 0.3 - 10 bar.Max. 22 l/min / 60 °CDN 10 mmType 2/2-way 1-chamber globe valve, servo-controlledCloses by float liftInstallation position Float vertically downwardsFor cold and heated drinking water as well as physically and chemically similar media.Float cylinder position adjustableValve body PA 66 glass fibre reinforcedMetal parts in the medium Stainless steelDiaphragm and seals EPDMFloat cylinder PE foamFloat lever POMDirt strainer POM (in the inlet)Properties:Proportional behaviour(volume flow depends on the position of the float lever)Servo-controlled mode of operation largely independent of the inlet pressureEasy to install and serviceCompact designFloat adjustable on threaded rodThreaded rods can be shortened at predetermined breaking pointsHigh functional reliability thanks to the use of high-quality materials and 100% final inspection of the productsApplicationsTank fillingHigh-pressure cleaning devices (system separation in accordance with EN 1717)Washing systemsIrrigation systemsIce machinesIndustrial appliancesDescription:Servo-controlled diaphragm valve with a nominal diameter of DN 10 that closes due to the buoyancy of the float to regulate the level in tanks.When liquid is removed from the tank, the float valve automatically tops up and thus keeps the level constant.If the water level rises and lifts the float in the tank, the inflow isthrottled in proportion to the position of the float lever. This prevents the tank from overflowingThis effectively prevents the tank from overflowing due to an excessive inflow when the tank is first filled.

Pressure 0.3 - 10 barMax. 22 l/min / 60°CDN 10 mmType 2/2-way 1-chamber globe valve, servo-controlledCloses by float liftInstallation position Float verticalFor cold and heated drinking water as well as physically and chemically similar media.Float cylinder position adjustableValve body PA 66 glass fibre reinforcedMetal parts in the medium Stainless steelDiaphragm and seals EPDMFloat cylinder PlasticFloat lever BrassDirt strainer POM (in the inlet)Properties:Proportional behaviour(volume flow depends on the position of the float lever)Servo-controlled mode of operation largely independent of the inlet pressureEasy to install and serviceCompact designFloat adjustableHigh functional reliability thanks to the use of high-quality materials and 100% final inspection of the productsApplicationsTank fillingHigh-pressure cleaning devices (system separation in accordance with EN 1717)Washing systemsIrrigation systemsIndustrial appliancesDescription:Servo-controlled diaphragm valve for level regulation in tanks that closes due to the buoyancy of the float.When liquid drains from the tank, the float valve automatically tops up and thus keeps the level constant.If the water level rises and lifts the float in the tank, the inflow isthrottled in proportion to the position of the float lever. This prevents the tank from overflowingThis effectively prevents the tank from overflowing due to an excessive inflow when the tank is first filled.

Type 2/2-way 1-chamber globe valve, servo-controlledCloses by float liftInstallation position Float verticalFor cold and heated drinking water as well as physically and chemically similar media.Float cylinder position adjustableValve body PA 66 glass fibre reinforcedMetal parts in the medium Stainless steelDiaphragm and seals EPDMFloat cylinder PlasticFloat lever BrassDirt strainer POM (in the inlet)Properties:Proportional behaviour(volume flow depends on the position of the float lever)Servo-controlled mode of operation largely independent of the inlet pressureEasy to install and serviceCompact designFloat adjustableHigh functional reliability thanks to the use of high-quality materials and 100% final inspection of the productsApplicationsTank fillingHigh-pressure cleaning devices (system separation in accordance with EN 1717)Washing systemsIrrigation systemsIndustrial appliancesDescription:Servo-controlled diaphragm valve for level regulation in tanks that closes due to the buoyancy of the float.When liquid drains from the tank, the float valve automatically tops up and thus keeps the level constant.If the water level rises and lifts the float in the tank, the inflow isthrottled in proportion to the position of the float lever. This prevents the tank from overflowingThis effectively prevents the tank from overflowing due to an excessive inflow when the tank is first filled.