Sewer cleaning such as milling nozzles etc.
Flunder nozzle holder for 2 flat spray nozzles 1/4" AG NPT
€97.32*
Inlet: 1/2" female threadNozzle connection: 2 x 1/4 "IG NPTMax. 420 bar / 150 °C / 80 L/minWidth approx. 72 mmWeight 1.5 kgAs support for 2 flat spray nozzles. Recommended spray angle 15°.The flounder nozzle is the standard solution for flushing out deposits.The heavy, forged brass design keeps the jet close to the dirt build-up on the floor and transports it to the entry openingNozzles interlocked at 45°, symmetrically loaded according to the appliance capacity.
Content:
1 Piece
Flunder nozzle holder for 2 ST-357 rotor nozzles 1/4" AG NPT
€90.90*
Flounder nozzle carrier for 2 ST-357 Rotor nozzles 1/4" AG NPT
Ideal for sewer cleaning suitable.
Width approx. 88 mm, weight approx. 2.5 kg.
Max. 350 bar / 90° C / 80 l/min.
Equipped with rotor nozzles symmetrically according to the appliance capacity.
As a carrier for 2 ST-357 rotor nozz les. The flounder nozzle is the ideal solution
for rinsing free of stuck deposits. The rotating jets
the rotating jets, the flushing effect is multiplied when the pipework is
multiplied. The heavy, forged brass design keeps the jet
near the dirt accumulations on the floor and transports them to the
to the inlet opening.
Content:
1 Piece
High-pressure sewerstar365+ rubber sewer flushing hose DN 12 1/2 "IG - 1/2 "AG length selectable
From
€500.94*
High pressure sewerstar365+ Rubbersewer flushing hoses DN 12 1/2 "IG - 1/2 "AG Length selectable
Inner diameter: 12 mm Outer diameter: 22.6 mm
Inlet: 1/2" female thread Outlet: 1/2" AG
Max. 250 bar / -40 - 150 °C
" Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR
All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure sewerclean365+ PU sewer flushing hoses DN 12 1/2 "IG - 1/2 "AG Length selectable
From
€882.23*
High pressure sewerclean365+ PUsewer flushing hoses DN 12 1/2 "IG - 1/2 "AG Length selectable
Inner diameter: 12 mm Outer diameter: 23.4 mm
Inlet: 1/2" female thread Outlet: 1/2" AG
Max. 275 bar / -40 - 60 °C
" Cut and abrasion resistant " Extremely long service life " Highly tear-resistant due to double insert of braided aramid fibres aramid fibres and polyurethane outer cover " Good floating properties " Outer cover resistant to ageing and weathering All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure sewerstar365+ rubber sewer flushing hoses DN 10 1/2 "IG - 1/2 "AG Length selectable
From
€435.04*
High pressure sewerstar365+ Rubbersewer flushing hoses DN 10 1/2 "IG - 1/2 "AG Length selectable
Inner diameter: 10 mm Outer diameter: 16.9 mm
Inlet: 1/2" female thread Outlet: 1/2" AG
Max. 280 bar / -40 - 150 °C
" Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR
All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure sewerstar365+ rubber sewer flushing hoses DN 10 3/8 "IG - 3/8 "AG Length selectable
From
€438.78*
High pressure sewerstar365+ Rubbersewer flushing hoses DN 10 3/8 "IG - 3/8 "AG Length selectable
Inner diameter: 10 mm Outer diameter: 16.9 mm
Inlet: 3/8" female thread Outlet: 3/8" AG
Max. 280 bar / -40 - 150 °C
" Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure sewerstar365+ rubber sewer flushing hoses DN 8 3/8 "IG - 1/4 "AG Length selectable
From
€407.58*
High pressure sewerstar365+ Rubbersewer flushing hoses DN 8 3/8 "IG - 1/4 "AG Length selectable
Inner diameter: 8 mm Outer diameter: 15.0 mm
Inlet: 3/8" female thread Outlet: 1/4" AG
Max. 500 bar / -40 - 150 °C
" Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR
All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure sewerstar365+ rubber sewer flushing hoses DN 8 3/8 "IG - 3/8 "AG Length selectable
From
€398.42*
High pressure sewerstar365+ Rubbersewer flushing hoses DN 8 3/8 "IG - 3/8 "AG Length selectable
Inner diameter: 8 mm Outer diameter: 15.0 mm
Inlet: 3/8" female thread Outlet: 3/8" AG
Max. 500 bar / -40 - 150 °C
" Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR
All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Granat 1V 4H ST-49 3/8" IG Size selectable
From
€114.40*
High pressure Stainless steel Pipe cleaning nozzle Garnet ST-49
Inlet: 3/8" female thread Outer diameter 30 mm. 4 rear holes 1 hole at the front max. 500 bar Applications:
" For the removal of sludge deposits " For removing blockages " De-icing Made of wear-resistant, hardened stainless steel, equipped with a centric front jet insert or blind plug front jet insert or blind plug (replaceable). Jet angle 30° to the rear, heavy-duty design, durable against abrasion. All nozzles are fitted with hardened stainless steel inserts. This increases the efficiency compared to directly drilled nozzles. The service life is increased several times increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Granat 1V 6H ST-49 3/8" IG Size selectable
From
€154.89*
High pressure Stainless steel Pipe cleaning nozzle Garnet ST-49
Inlet: 3/8" female thread
Outer diameter 30 mm.
6 holes at the back
1 hole at the front
max. 500 bar
Applications:
" For the removal of
sludge deposits
" For removing blockages
" De-icing
Made of wear-resistant, hardened stainless steel, equipped with a centric front jet insert or blind plug
front jet insert or blind plug (replaceable).
Jet angle 30° to the rear, heavy-duty design, durable against abrasion.
All nozzles are fitted with hardened stainless steel inserts. This increases the efficiency
compared to directly drilled nozzles. The service life is increased several times
increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Granat ST-49 1/2" AG Size selectable
From
€157.32*
High pressure Stainless steel Pipe cleaning nozzle Garnet ST-49
Inlet: 1/2" AG Outer diameter 30 mm. 6 holes at the back 1 hole at the front max. 500 bar Applications:
" For the removal of sludge deposits " For removing blockages " De-icing Made of wear-resistant, hardened stainless steel, equipped with a centric front jet insert or blind plug front jet insert or blind plug (replaceable). Jet angle 30° to the rear, heavy-duty design, durable against abrasion. All nozzles are fitted with hardened stainless steel inserts. This increases the efficiency compared to directly drilled nozzles. The service life is increased several times increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Granat ST-49 1/2" IG Size selectable
From
€168.53*
High pressure Stainless steel Pipe cleaning nozzle Garnet ST-49
Inlet: 1/2" female thread Outer diameter 30 mm. 6 holes at the back 1 hole at the front max. 500 bar Applications:
" For removing sludge deposits " For removing blockages " De-icing Made of wear-resistant, hardened stainless steel, equipped with a centred front jet insert or blind plug front jet insert or blind plug (replaceable). Jet angle 30° to the rear, heavy-duty design, durable against abrasion. All nozzles are fitted with hardened stainless steel inserts. This increases the efficiency compared to directly drilled nozzles. The service life is increased several times increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Granat ST-49 1/4" IG Size selectable
From
€148.82*
High pressure Stainless steel Pipe cleaning nozzle Garnet ST-49
Inlet: 1/4" female thread Outer diameter 25 mm. 4 holes at the back 1 hole at the front max. 500 bar Applications:
" For the removal of sludge deposits " For removing blockages " De-icing Made of wear-resistant, hardened stainless steel, equipped with a centric front jet insert or blind plug front jet insert or blind plug (replaceable). Jet angle 30° to the rear, heavy-duty design, durable against abrasion. All nozzles are fitted with hardened stainless steel inserts. This increases the efficiency compared to directly drilled nozzles. The service life is increased several times increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Milling nozzle ST-49 1/2" IG Size selectable
From
€220.59*
High pressure stainless steel Pipe cleaning nozzle Milling nozzle ST-49
Inlet: 1/2" IG
For pipes > 60 mm
Max. 350 bar
Applications:
" Penetration of totally clogged pipes
" Opening of rooted pipes
" Opening frozen pipes" Flushing out steel pipes after jacking
With its 3 or 4 concentrated front jets and sharp cutting edges, the milling nozzle works its way
cutter nozzle works its way through almost any type of blockage. The pronounced cutting edges cut,
tear and drill through any blockage. Made from wear-resistant, hardened stainless steel.
stainless steel. All nozzles are fitted with hardened stainless steel inserts at the back and centre front.
nozzle inserts. This significantly increases efficiency compared to directly drilled nozzles.
drilled nozzles. The service life is increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Milling nozzle ST-49 1/4" IG Size selectable
€159.99*
High pressure stainless steel Pipe cleaning nozzle Milling nozzle ST-49
Inlet: 1/4" female thread
For pipes > 30 mm
Max. 350 bar
Applications:
" Penetration of totally clogged pipes
" Opening of rooted pipes
" Opening frozen pipes" Flushing out steel pipes after jacking
With its 3 or 4 concentrated front jets and sharp cutting edges, the milling nozzle works its way
cutter nozzle works its way through almost any type of blockage. The pronounced cutting edges cut,
tear and drill through any blockage. Made from wear-resistant, hardened stainless steel.
stainless steel. All nozzles are fitted with hardened stainless steel nozzle inserts to the rear and centred to the front.
nozzle inserts. This significantly increases the efficiency compared to directly drilled nozzles.
drilled nozzles. The service life is increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Milling nozzle ST-49 3/4" IG Size selectable
€255.11*
High pressure stainless steel Pipe cleaning nozzle Milling nozzle ST-49
Inlet: 3/4" IG For pipes > 80 mm 4 holes at the front 6 holes at the rear Max. 300 bar Applications: " Penetration of totally clogged pipes " Opening of rooted pipes " Opening frozen pipes " Flushing out steel pipes after jacking With its 4 concentrated front jets and sharp cutting edges, the milling nozzle works its way cutter nozzle works its way through almost any type of blockage. The pronounced cutting edges cut, tear and drill through any blockage. Made from wear-resistant, hardened stainless steel. stainless steel. All nozzles are fitted with hardened stainless steel nozzle inserts to the rear and centred to the front. nozzle inserts. This significantly increases the efficiency compared to directly drilled nozzles. drilled nozzles. The service life is increased several times over.
Content:
1 Piece
High-pressure stainless steel pipe cleaning nozzle Milling nozzle ST-49 3/8" female thread size selectable
€217.05*
High pressure stainless steel Pipe cleaning nozzle Milling nozzle ST-49
Inlet: 3/8" IG For pipes > 50 mm Max. 350 bar Applications: " Penetration of totally clogged pipes " Opening of rooted pipes " Opening frozen pipes " Flushing out steel pipes after jacking With its 3 or 4 concentrated front jets and sharp cutting edges, the milling nozzle works its way cutter nozzle works its way through almost any type of blockage. The pronounced cutting edges cut, tear and drill through any blockage. Made from wear-resistant, hardened stainless steel. stainless steel. All nozzles are fitted with hardened stainless steel nozzle inserts to the rear and centred to the front. nozzle inserts. This significantly increases the efficiency compared to directly drilled nozzles. drilled nozzles. The service life is increased several times over.
Content:
1 Piece
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts 1/2" size selectable
From
€333.68*
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts
Inlet: 1/2" female thread Outer diameter 38 mm. 5 holes at the back 3 holes on the side max. 350 bar Weight 585 gr
Applications:
" For the removal of sludge deposits " For removing blockages " De-icing Stainless steel. Bronze rotating body. Very good cleaning effect due to rotating nozzle jets. Interchangeable inserts. High tractive force due to specially arranged back jets. Pressure max. 350 bar.
Content:
1 Piece
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts 1/4" size selectable
From
€293.68*
High-pressure stainless steel rotary nozzle Granat ST-49.2 for pipes/ducts
Inlet: 1/4" female thread
Outer diameter 30 mm.
4 holes at the back
3 holes on the side
max. 350 barWeight 317 gr
Applications:
" For the removal of
sludge deposits
" For removing blockages
" De-icing
Stainless steel. Bronze rotating body. Very good cleaning effect
due to rotating nozzle jets. Interchangeable inserts. High tractive force
due to specially arranged back jets.
Pressure max. 350 bar.
Content:
1 Piece
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts 3/4" size selectable
From
€481.52*
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts
Inlet: 3/4" female thread
Outer diameter 38 mm.
6 holes at the back
3 holes on the side
max. 350 barWeight 554 gr
Applications:
" For the removal of
sludge deposits
" For removing blockages
" De-icing
Stainless steel. Bronze rotating body. Very good cleaning effect
due to rotating nozzle jets. Interchangeable inserts. High tractive force
due to specially arranged back jets.
Pressure max. 350 bar.
Content:
1 Piece
High-pressure stainless steel rotating nozzle Granat ST-49.2 for pipes/ducts 3/8" size selectable
From
€288.12*
High-pressure stainless steel rotary nozzle Granat ST-49.2 for pipes/ducts
Inlet: 3/8" female thread
Outer diameter 30 mm.
4 holes at the back
3 holes on the side
max. 350 barWeight 307 gr
Applications:
" For the removal of
sludge deposits
" For removing blockages
" De-icing
Stainless steel. Bronze rotating body. Very good cleaning effect
due to rotating nozzle jets. Interchangeable inserts. High tractive force
due to specially arranged back jets.
Pressure max. 350 bar.
Content:
1 Piece
Nozzle inserts M5 Size selectable
€9.64*
M5 nozzle inserts in various sizes
Full jet. 500 bar. Hexagon socket 2.5 mm. Hardened stainless steel
External thread M5 Nozzle size 0 - 0885 Bore diameter 0 - 2.0 mm
Content:
1 Piece
Pipe cleaning nozzle M22x1.5 AG 6x0.8 30° 090
€58.56*
Stainless steel6 nozzles to the rear, no front holePipe cleaning nozzles ST-49Made of wear-resistant, hardened stainless steel.Heavy-duty design, durable against abrasion.All nozzles are fitted with hardened stainless steel inserts.This increases the efficiency enormously compared to directly drilled nozzles.drilled nozzles.The service life is increased several times over.Applications:For removing sludge depositsDe-icing
Content:
1 Piece