High-pressure pipe cleaning hose DN 6 Flexy M22IG with nozzle Length selectable Inner diameter: 6 mmInlet: M22 IGOutlet: Pipe cleaning nozzle 3x back jet 1x front jet Max. 300 bar / 100 °C

Inlet: 1/2" female threadNozzle connection: 2 x 1/4 "IG NPTMax. 420 bar / 150 °C / 80 L/minWidth approx. 72 mmWeight 1.5 kgAs support for 2 flat spray nozzles. Recommended spray angle 15°.The flounder nozzle is the standard solution for flushing out deposits.The heavy, forged brass design keeps the jet close to the dirt build-up on the floor and transports it to the entry openingNozzles interlocked at 45°, symmetrically loaded according to the appliance capacity.

Flounder nozzle carrier for 2 ST-357 Rotor nozzles 1/4" AG NPT Ideal for sewer cleaning suitable. Width approx. 88 mm, weight approx. 2.5 kg. Max. 350 bar / 90° C / 80 l/min. Equipped with rotor nozzles symmetrically according to the appliance capacity. As a carrier for 2 ST-357 rotor nozz les. The flounder nozzle is the ideal solution for rinsing free of stuck deposits. The rotating jets the rotating jets, the flushing effect is multiplied when the pipework is multiplied. The heavy, forged brass design keeps the jet near the dirt accumulations on the floor and transports them to the to the inlet opening.

High pressure Mini Pipe cleaning hose 1/8 "AG length selectable Nominal width: DN 2Nozzle size: 03Pressure: 350 - 500 barTemperature: 60°C Heat exchangers in combined heat and power plants or conveyor pipes in the food industry are often pipework with a diameter of 10 to 12 mm. To effectively clean the inside of these pipes of residues and deposits and deposits, pipe cleaning devices with small diameters and high permissible pressures are required. and high permissible pressures. Here, too, we have the optimum solution for you, suitable from 350 bar! "Small" as desired and "big" with plenty of power. We are talking about the new mini pipe cleaning device. With a diameter of just 9 mm, it can withstand working pressures of up to 500 bar. bar. The pipe cleaning nozzle is made from stainless steel and has three outlets to the rear (propulsion) and one to the front. The mini pipe cleaning nozzle is supplied with a black plastic plastic hose with a nominal width of 2 and a 1/8" AG connection. supplied to you.

Mini pipe cleaning nozzle M7 FEMALE THREAD. 3 holes to the rear for optimum propulsion. Additional 3 lateral holes (90°) for high impact forces and optimum wall wall cover. Outside 9.8 mm. Stainless steel. Max. 500 bar Heat exchangers in combined heat and power plants or conveyor pipes in the food food industry are often pipes with a diameter of 10 to of 10 to 12 mm. To effectively clean the inside of these pipes of residues and deposits, pipe cleaning devices with small diameters and high permissible pressures are required. small diameters and high permissible pressures. With a diameter of just 9.8 mm, it can withstand working pressures of up to 500 bar. In combination with our R+M 1 / bronze hose (304 20), the working pressure is max. 300 bar and 100° C

Pipe cleaning hose Plastic hose with one fabric layer Nominal width: 5 Design: smooth surface max. 200 bar / 20°C Colour: blue Connection: M22x1.5 AG Connection: 1/8 "AG with O-ring seal

Pipe cleaning hose Plastic hose with one wire insert Nominal width: 4 Design: smooth surface max.300 bar / 99°C Colour: bronze Connection: 1/8" AG Connection: 1/8" AG

Pipe cleaning hose Plastic hose with one wire insert Nominal width: 4 Design: smooth surface max.300 bar / 99°C Colour: bronze Connection: M22x1.5 AG Connection: 1/8" AG

Pipe cleaning hose Plastic hose with one fabric insert Design: smooth surface max. 120 bar / 20 °C Colour: black Connection: 1/8 "AG with O-ring seal Connection: 1/8 "AG with O-ring seal

Pipe cleaning hose Plastic hose with one threaded insert Nominal width: 5 Design: smooth surface max. 120 bar / 20°C Colour: Black Connection: Plug nipple Bayonet K Connection: 1/8" AG

Pipe cleaning hoses Plastic hose with one fabric insert Design: smooth surface max. 120 bar / 20 °C Colour: black Connection: M21x1.5 female thread (washing device nipple) Connection: 1/8 "male thread with O-ring seal

Pipe cleaning hose Plastic hose with one fabric insert Design: smooth surface max. 120 bar / 20 °C Colour: black Connection: DKO M22x1.5 (washing device nipple) Connection: 1/8 "AG with O-ring seal

Pipe cleaning hose Plastic hose with a fabric insert Design: smooth surface max. 120 bar / 20°C Colour: black Connection: plug-in nipple KW-Hobby Connection: 1/8" AG

Pipe cleaning hose Plastic hose with a fabric insert Design: smooth surface max. 120 bar / 20°C Colour: black Connection: plug-in nipple KW-Profi Connection: 1/8" AG

Pipe cleaning hose Plastic hose with a fabric lining Design: smooth surface max. 120 bar / 20 °C Colour: black Connection: DKO M22x1.5 (washing machine nipple) Connection: 1/8 "AG with O-ring seal

Pipe cleaning hose Type: flexy® DN06 Design: smooth surface max. 300 bar / 100 °C Colour: black Connection: M22x1.5 female thread (washing device nipple) Connection: 1/8 "male thread with O-ring

High-pressure pipe cleaning hose DN 6 Flexy M22IG - 1/4 "AG Length selectable Inner diameter: 6 mm Inlet: M22 IG Outlet: 1/4" AG Max. 300 bar / 100 °C

High-pressure pipe cleaning hose DN 6 Flexy M22IG - 1/8 "AG Length selectable Inner diameter: 6 mm Inlet: M22 IG Outlet: 1/8" AG Max. 300 bar / 100 °C

High pressure sewerstar365+ Rubbersewer flushing hoses DN 12 1/2 "IG - 1/2 "AG Length selectable Inner diameter: 12 mm Outer diameter: 22.6 mm Inlet: 1/2" female thread Outlet: 1/2" AG Max. 250 bar / -40 - 150 °C " Highly abrasion-resistant with extremely long service life " High flexibility thanks to specially developed rubber compound " Extremely abrasion-resistant, ageing and weather-resistant outer cover " Easy handling due to low weight " Outstanding tensile and compressive strength " Extremely small bending radius " Wire mesh inlay for high stability " Core and cover are made of NR/SBR All hoses are supplied with an acceptance test certificate in accordance with EN 10204.3.1.

Stainless steel

Pipe cleaning hose Plastic hose with a fabric reinforcement Nominal width: 5 Design: smooth surface max. 200 bar / 20°C Colour: blue Connection: 1/8 "AG with O-ring seal Connection: 1/8 "AG with O-ring seal

High-pressure pipe cleaning hose DN 6 Flexy bayonet - 1/8 "AG length selectable Inner diameter: 6 mm Inlet: Bayonet Outlet: 1/8" AG Max. 300 bar / 100 °C

Pipe cleaning hoseDesign: smooth surfacemax. 300 bar / 100 °CColour: blackConnection: Plug nipple ST-247Connection: 1/8 "AG with O-ring seal

Pipe cleaning hose Type: flexy® DN06 Design: smooth surface max. 300 bar / 100 °C Colour: black Connection: 1/4" AG Connection: 1/4" AG