Stationary equipment for self-service car washes

for easywash365+ ceiling tops

Easywash brush container with overflow and side drain plug for cleaning. Wall and floor mounting in self-service car washes H x W x D 670 x 340 x 143 mm

Two-part stainless steel brush container with cleaning slot. Floor mounting for different washing brush lengths. Holder: H x W x D: 315 x 305 x 120 mm. Holder tube: Tube Ø 42 mm, height-adjustable from 570 mm to 1,000 mm Material: Stainless steel

easywash365+ stainless steel pre-wash trolleyIdeal for the pre-wash area in car washes.Carriage and tub made entirely of stainless steel.Ready-to-connect system:Only needs to be connected to the water pipe. Including ST-45 inlet coupling (hose nozzle with plug-in nipple for 1/2" DN 13 or 3/4" DN 19) anddrain tap on the underside (with grommet for DN 13)The water and detergent supply is automatically closed or opened by a float valve.The detergent can be dosed using the various dosing nozzles supplied.Two separate holding areas for different brushes:(hand washing brushes Brushes with long handle)High-quality tyres made of abrasion-resistant materialReceptacle for detergent canisters up to - 30 litres

The straight swivel arm with a spring is characterised by a stainless steel construction in box form with two ball bearings and double watertight seal without maintenance requirements for easy 360° rotation. FURTHER INFORMATION: Viton seals 360° rotation angle Length 1750 or 2000 mm Max. 210bar / 90°C Connections inlet 1/4 "IG - outlet 3/8" AG

The straight swivel arm with two springs is characterised by a tubular stainless steel construction with two ball bearings and double watertight seal without the need for maintenance. FURTHER INFORMATION: Viton seals 360° angle of rotation Length 1750 or 2000 mm Max. 210bar / 90°C Connections inlet 1/4 "IG - outlet 3/8" AG

Mosmatic LED high-pressure ceiling gyroMaterial: Polished stainless steelLength: 1750 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 10.2 kgMax. 275 bar / 90 °CVoltage. 24 VLight intensity: 120 lxProtection class: IP66Ceiling gyro with ball-bearing pivot point.Maintenance-free.Connection with swivel joint." Customised and effective" Visualisation of the wash programme" Additional lighting of the wash box" Stand out from the competitionThe world first for the self-service wash bay. The ceiling gyro with LED can be used to visualise the wash programme, for example. It is not only an eye-catcher for self-service systems, but also provides additional lighting for the self-service box. Due to the electronics, this product must be installed with particular care and by a specialist with the appropriate expertise.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

Positioner with magnet. The positioner ensures that theMosmatic Z ceiling gyro is parked in a predefined position.

easywash365+ ceiling gyroscope Stainless steel. Ready for installation with 2 integrated quality swivel joints, professional high-pressure hose with strain relief spring and integrated kink protection. Axle with 2 bearings and permanently lubricated. Max. 275 bar / 90 °C. Connections: 1/4IG-AG Length: 1550mm

easywash365+ ceiling gyroscope with suspension Stainless steel. Ready for installation with 2 integrated quality swivel joints, professional high-pressure hose with strain relief spring and integrated kink protection. Axle with 2 bearings and permanently lubricated. Max. 275 bar / 90 °C. Connections: 1/4IG-AGLength: 1550mm

Mosmatic LED high-pressure ceiling gyro ZMaterial: Polished stainless steelLength: 1550 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 10.2 kgMax. 275 bar / 90 °CVoltage. 24 VLight intensity: 120 lxProtection class: IP66Ready for installation with 2 integrated quality swivel joints.Especially suitable for the use of 2 ceiling gyroscopes next to each other.High-pressure hose with insulation." Customised and effective" Visualisation of the wash programme" Additional lighting of the wash box" Stand out from the competitionThe world first for the self-service wash bay. The ceiling gyro with LED can be used to visualise the wash programme, for example. It is not only an eye-catcher for self-service systems, but also provides additional lighting for the self-service box. Due to the electronics, this product must be installed with particular care and by a specialist with the appropriate expertise.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

The Z-shaped curved swivel arm with a spring is characterised by a tubular stainless steel construction with two ball bearings and double watertight seal with no maintenance required for easy 360° rotation. The internal hose is made of rubber. FURTHER INFORMATION: Viton seals 360° rotation angle Length 1550 mm Max. 210bar / 90°C Connections inlet 1/4 "IG - outlet 3/8" AG

The Z-shaped swivel arm with two springs with two springs is characterised by a tubular stainless steel construction with two ball bearings and double watertight seal for easy 360° rotation without the need for maintenance. The internal hose is made of rubber. FURTHER INFORMATION: Viton seals 360° rotation angle Length 1550 mm Max. 210bar / 90°C Connections inlet 1/4 "IG - outlet 3/8" AG

easywash365+ ceiling gyroscope Stainless steel. Ready for installation with 2 integrated quality swivel joints, professional high-pressure hose with strain relief spring and integrated kink protection. Axle with 2 bearings and permanently lubricated. Max. 275 bar / 90 °C. Connections 1/4IG-AG

The cleaning fluid drives the cleaning head by means of specially aligned nozzles due to its recoil force. The alignment of the nozzles keeps the speed in an optimum range, even over large pressure ranges, and the nozzles thus achieve a high spraying power and range.Made entirely of stainless steel, with swivel joint DYT.Supplied without nozzles. 4 point jet nozzle mouthpieces are required.

Crevice nozzle holder for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Crevice nozzle holder for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Crevice nozzle holder on column for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Crevice nozzle holder on column for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Stable and expandable Attractive design Extremely robust and stable Stainless steel design Polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Dual crevice nozzle holder on pillar for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Sturdy and expandable Attractive design Extremely robust and stable Stainless steel design, polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Dual crevice nozzle holder on pillar for CarWash hoses The practical holder for crevice nozzle accessories Designed for centralised suction systems, can also be used for individual self-service vacuum cleaners High-quality workmanship Sturdy and expandable Attractive design Extremely robust and stable Stainless steel design, polished and brushed No weld seams Mounts are designed for the new sockets, which can also be easily rotated under vacuum.

Material: Stainless steelLength: 1450 / 1550 mmone arm for high pressure and the other for low pressureInlet: 1/4 "IGOutlet: 1/4 "AGMax. 275 bar / 90 °CReady for installation with 3 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

The flexible double swivel arm from MTM with two springs is made of stainless steel and is available in 4 different versions with different lengths.Material: Stainless steelLength: 1600/1750 mm, 1750/2000mm, 2000/2500mm or 2500/3000mmInlet: 1/4 "IGOutlet: 3/8 "AGWeight: 13.5 kgMax. 210 bar / 90 °CReady for installation with 2 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.

easywash365+ ceiling gyroscope with springMaterial: Stainless steelLength: 1600 / 1750 mmInlet: 1/4 "IGOutlet: 1/4 "AGWeight: 13.5 kgMax. 275 bar / 90 °CReady for installation with 2 integrated quality swivel joints,professional high-pressure hose with strain relief spring and integrated kink protection.Axle with 2 bearings and permanently lubricated.Specially developed for 2 different media and applications.