Sprayers

Sorting

EPDM Sprayer Industry Line sealing kit

Repair and seal set for all Marolex pressure sprayers in the Industry Line series Scope of delivery of the set: Non-return valve pump (R24) Silicone grease Filter (R40, no. 12) Lance clamp (R107, no. 30) Valve piston with O-rings 3x2, (R43, R42, no. 26 and 41) Metering valve spring (R48a, no. 27) O-ring 11.3x2.4 (R47c no. 37) O-ring 38x5 (R14, no. 35) O-ring 28x4 (R22, No. 36) O-ring 5.3x2 (R116, no. 40) Seal 16x24 (R17, no. 33)

Content: 1 Piece

€22.50*

Foam gun 1 litre

Technical specificationsWater pressure 2.5 - 6 bar (for maximum accuracy 3 - 4 bar)Output 5.5 l/minConnection: Tap connectorMixing ratioThe dosing head has 5 settings and OFF.ApplicationsFor the use of acidic and alkaline cleaners as well as soaps, disinfectants, degreasers and descaling agents for a wide range of applications." Food industry and commercial kitchens" Sanitary facilities and swimming pools" Cleaning lorries, cars and other vehicles" Car workshops and petrol stations" Workshops and production plantsCleaning foam is produced using foam injectors that are connected directly to the water pipe. The cleaning agent and air are sucked in by the water pressure, both are swirled together to form a foam and sprayed using a foam attachment or a spray head. At the same time, the cleaning agent can be diluted specifically and automatically by a dosing device in order to select the correct dosage for each application.Properties" Good chemical resistance to alkaline and acidic products." Produces a strong, long-lasting foam." Automatic dosing of chemicals." Dosing head made of polymer plastic with stainless steel screws." 5-way adjustable dosing." Non-return valve built into the gun handle." Gun can be removed via quick-release coupling for rinsing with water." Easy filling due to wide opening." Only works with water line pressure." Suitable for all commercially available water couplings.

Content: 1 Piece

€128.57*

Foam injector LS3 1 litre connection selectable

LS3 foam lance with dosage and bottleMax. 180 bar / 60°C / 12 l/minNozzle: 1.25 mm

Content: 1 Piece

From €91.89*

Details

Foam injector ST-60-1 3/8 "IG/3/8 "AG 1.8/2.4

ST-60.1 BrassInjector without dosingNozzle size 1.6Inlet 3/8" AGOutlet 3/8" female threadMax. 250 bar / 60°CCan also be used as a low-pressure injector:Min. 2 bar - max. 10 barFlow rate at 2 bar approx. 150 l/hAdmixture approx. 0 - 11.5%

Content: 1 Piece

€73.13*

Foam injector ST-60.1 3/8 "IG/3/8 "AG 1.6/2.0

Content: 1 Piece

€72.16*

Foam sprayer AXEL 2000 2 litres

Foam sprayer AXEL 2000 2 litres Equipment: " incl. 3 additional foam nozzles with replaceable pads pads " EPDM seal kit The AXEL foam sprayer is ready for use after filling (max. 2/3 litre) and briefly pumped up (up to 4 bar pressure) it is immediately ready for use. The scope of delivery includes 3 additional foam nozzles. These can be quickly changed depending on the desired foam carpet, can be changed quickly. This makes this sprayer unique in terms of its in terms of its versatility. Thanks to the EPDM seals, the sprayer is ideal for a a variety of cleaners / shampoos. suitable. Remove the foam nozzle inserts and the AXEL 2000/3000 also sprays like a normal pressure sprayer. This makes the AXEL foam sprayers probably one of the best foam sprayers of this type on the market.

Content: 1 Piece

€44.40*

Foam sprayer AXEL 3000 3 litres

Foam sprayer AXEL 3000 3 litres Equipment: " incl. 3 additional foam nozzles with replaceable pads pads " EPDM seal kit The AXEL foam sprayer is ready for use after filling (max. 2/3 litre) and briefly pumped up (up to 4 bar pressure) it is immediately ready for use. The scope of delivery includes 3 additional foam nozzles. These can be quickly changed depending on the desired foam carpet, can be changed quickly. This makes this sprayer unique in terms of its in terms of its versatility. Thanks to the EPDM seals, the sprayer is ideal for a a variety of cleaners / shampoos. suitable. Remove the foam nozzle inserts and the AXEL 2000/3000 also sprays like a normal pressure sprayer. This makes the AXEL foam sprayers probably one of the best foam sprayers of this type on the market.

Content: 1 Piece

€45.37*

Foam unit with stainless steel pressurised container Selectable size

" Capacity 24.50 or 100 litres" Material stainless steel AISI 304, V2A" Convenient filling thanks to plastic funnel." 1/4" male connection for compressed air supply." Max. 8 bar. Preset safety valve." Chemical-resistant hose 10 m. 60 cm spray lance with nozzle. Fill level indicator." Combination dosing unit with adjustment option for air/foaming agent mixture. We recommend a permanent supply of compressed air to achieve a uniform foam pattern." Suitable for the food industry, vehicle cleaning and industry.For storing and applying group 2 liquids in accordance with Directive EEC/67/548 Art. 2, Para. 2 and Directive EC/97/23 Art. 9. Not suitable for group 1 liquids and in particular strong alkalis and acids.

Content: 1 Piece

€701.97*

Details

Gun CP12 1/2" IG lance 600mm VA with nozzle 0.9mm/02

MAX PRESSURE (bar) 25 MAX DELIVERY (l/min) 30 PIPE STAINLESS STEEL INLET G 1/2" FEMALE THREAD The special version of the Universal guns with integrated stainless steel lance and flat jet nozzle. The atomising gun Universal from CT is an accessory designed to work with various types of liquid solutions: alkaline or acidic detergent, disinfectant and hygiene solutions, plant protection products and others. There are different versions of the Universal gun, which can be distinguished by the different coloured levers. There are different versions of the UNIVERSAL gun; distinguishable by the different colours of the levers. Each version is characterised by a different design and makes the gun compatible with specific chemical products.

Content: 1 Piece

€32.33*

Gun CP12 1/2" IG lance 600mm VA with nozzle 1.1mm/03

Content: 1 Piece

€32.33*

Gun RB35 E:1/2" Swivel 50°C/50L/min

Max. 12 bar / 50°CArticle no.: 500535500Gun with infinitely variable spray angle adjustment and safety bracketMax. 12 bar / 50 l/min / 50°CInlet: 1/2" female thread rotatableMaterial: Brass

Content: 1 Piece

€82.02*

Gun RB35 E:1/2" Swivel 80°C/50L/min

Max. 12 bar / 80°CArticle no.: 500535510Gun with infinitely variable spray angle adjustment and safety bracketMax. 12 bar / 50 l/min / 80°CInlet: 1/2" IG rotatableMaterial: Stainless steel

Content: 1 Piece

€101.29*

Handle incl. valve for Industry 7, 9 + 12 litre sprayers

The handle has been profiled in such a way as to fit the hand properly, ensuring a secure grip and precise centre dosing, both for right and left-handed users. The dispensing valve is equipped with an automatic lock in the on position, so it is not necessary to hold the button during prolonged spraying. The piston of the dosing valve is equipped with a double seal, which functions as an automatic lubrication, which guarantees trouble-free operation of the valve, and the seals used in the handle are resistant to acids. The full list of agents is available in the resistance table. The set with the handle also includes a filter that limits the number of particles that can clog the spray nozzles.

Content: 1 Piece

€15.94*

High-pressure gun Foam lance ST-75-1.9 St-1100 different versions

Foam lance also suitable for Washtec SB systemsGun ST-1100Spray wand with extension 333 mmFoam nozzle ST-75 1.9 mmMax. 310 bar / 25 l/min / 150 °CInlet: 3/8 "IG optionally rigid or swivelling (swivel)

Content: 1 Piece

From €149.75*

Details

Inlet filter 0.7 mm low pressure gun

Plastic filter for ST-510 + CP12 Max. 50°C

Content: 1 Piece

€1.71*

Long-throw lance ST-78-850 ST-29 ST-2620 1/2IG Swivel

Gun easyfarm365+Length 850 mm with 300 mm insulation ST-29 Cool & Compact.Plastic nozzle guard without nozzle.Max. 250 bar / 60 l/min / 100 °CInlet: 1/2 "IG rotatable

Content: 1 Piece

€296.16*

Low-pressure injector + volume control

Low-pressure injector with dosingSuction hose 1 mSuction filter ST-31Min. 2 bar - max. 10 bar3/4" IG : 3/8" IGWith coupling and tap connector

Content: 1 Piece

€125.49*

MAXX CLEANING GUN

With its new motor, lighter container, high performance and compressed air regulator, the Maxx is an excellent alternative. Dimensions: Overall length of the gun : 32 cmOverall height : 23 cmDiameter of the tank : 11 cmWeight : ± 1 kgTank capacity : 1 litreProduct characteristics : With compressed air connection (between 6 and 8 bar).Air consumption : 310 l/min.

Content: 1 Piece

€139.20*

Nozzle carrier ST-330 Nozzle nut : M18IG clampable

240° swivelling stainless steelMax. 310 bar / 45 l/min / 150°CSwivelling made easy!For cleaning areas that are difficult to access, containers e.g.feed troughs and guttersSimple and stepless adjustment of the spray directionMade entirely of stainless steelIncl. clamping screw to fix the set angleCan be swivelled up to an angle of 240°

Content: 1 Piece

€66.16*

Pre-sprayer with stainless steel pressure tank - various sizes

Pre-sprayers with pressurised tank" Capacity 24, 50 or 100 litres" Material stainless steel AISI 304, V2A" Convenient filling thanks to plastic funnel." 1/4" male connection for compressed air supply." Max. 8 bar. Preset safety valve." Chemical-resistant hose 10 m. " 60 cm spray lance with nozzle." Fill level indicator." Suitable for vehicle and industrial cleaning.For storing and applying Group 2 liquids in accordance with Directive EEC/67/548 Art. 2, Para. 2 and Directive EC/97/23 Art. 9. Not suitable for Group 1 liquids and in particular strong alkalis and acids.

Content: 1 Piece

€649.41*

Details

Pressure hose ACID-LINE 5m

5 m fabric-reinforced pressure hose, suitable for all Marolex ACID-LINE pressure sprayers (except battery-powered devices*), complete with screw connection and Viton seals

Content: 1 Piece

€29.00*

Pump for Sprayer Industry

Content: 1 Piece

€23.76*

R+M foamer 24 litres red

Foam equipment with pressurised container" Capacity 24 litres" Material steel painted red" Convenient filling thanks to plastic funnel." 1/4" male connection for compressed air supply." Max. 8 bar. Preset safety valve." Chemical-resistant hose 10 m. " 60 cm foam lance with foam head and 4 nozzles." Fill level indicator." Combination dosing unit with adjustment option for air/foaming agent mixture. We recommend a permanent supply of compressed air to achieve a uniform foam pattern." Suitable for vehicle and industrial cleaning." Also available in other RAL colours from 10 pieces.For storing and applying group 2 liquids in accordance with Directive EEC/67/548 Art. 2, Para. 2 and Directive EC/97/23 Art. 9. Not suitable for group 1 liquids and in particular strong alkalis and acids.

Content: 1 Piece

€333.99*

R+M foamer 50 L. painted red

Foam equipment with pressurised container" Capacity 50 litres" Material steel painted red" Convenient filling thanks to plastic funnel." 1/4" AG connection for compressed air supply." Max. 8 bar. Preset safety valve." Chemical-resistant hose 10 m. " 60 cm foam lance with foam head and 4 nozzles." Fill level indicator." Combination dosing unit with adjustment option for air/foam mixture. We recommend a permanent supply of pressurised air to achieve a uniform foam pattern." Suitable for vehicle and industrial cleaning." Also available in other RAL colours from 10 pieces.Dispatch only possible by forwarding agent.For storing and applying group 2 liquids in accordance with Directive EEC/67/548 Art. 2, Para. 2 and Directive EC/97/23 Art. 9. Not suitable for group 1 liquids and in particular strong alkalis and acids.

Content: 1 Piece

€408.12*

Interesting for you

High-pressure complete lance easywash365+ Swivel 600/300mm 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

15° angled easywash365+ jet pipes by SuttnerSpray wand 600mm with overmoulded insulation 300mm Cool & Compacteasywash365+ gun without frost protectionStainless steel jet pipeInsulation easywash365+ blueInlet: 3/8" IG swivellingOutlet: Nozzle protection ST-10 1/4 "IG-NPTMax. 310 bar / 150°CLTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €113.56*

€115.83*

High-pressure complete lance easywash365+ Swivel 800/410mm 1/4"/40040

Hose connection?: 1/4" | Nozzle size: 40040

15° angled easywash365+ spray lances by SuttnerSpray lance 800mm with overmoulded insulation 400mm Cool & Compact easywash365+ gun with weep frost protection Spray lance stainless steel rotatable Insulation easywash365+ blue Inlet: 3/8" IG rotatable Outlet: nozzle protection ST-10 1/4 "IG-NPT Max. 310 bar / 150°C LTF - Low Trigger Force 90 % lower holding force and 40 % lower trigger force compared to standard guns on the market.

Content: 1 Piece

Variants from €114.73*

€123.30*

Complete lance Ecoline ST-28 900mm

Length?: 900mm

Length 500 or 900mm,ST-28 insulation,ST-10 nozzle protectionType: R+M EcoLine No. ONE professional high-pressure spray gunMax. 250 bar / 45 l/min / 150°CInlet: 3/8" IGOutlet: Spray wand ST-28 galvanised steelSpray wand insulation ST-28 Cool & CompactNozzle guard ST-10 1/4 "IG-NPT (without nozzle)

Content: 1 Piece

Variants from €52.84*

€56.87*

easywash365+ pre-spray lance 500mm 1/4" AG Nozzle selectable without

HD nozzle?: without

Stainless steel spray wand with easywash365+ handleNozzle guard ST-10 without nozzleMax. 350 bar / 45 l/min / 120°CLength 500 mmInlet: 1/4" AGOutlet: 1/4" IG-NPT

Content: 1 Piece

€50.97*

easywash365+ stainless steel high pressure lance 900mm

Easywash stainless steel high-pressure lance, jet pipe with overmoulded insulation. Ideal for Washing brushes. Connections: 2 x 1/4" external thread Total length: 900 mm Length of insulation: 700 mmMax. 400 bar / 150 °C

Content: 1 Piece

€42.22*

Foam lance easywash365+ ST-75 Version selectable 1/4" 1.05 without

Duesengroeße?: 1,05 | Antifreeze?: without | Hose connection?: 1/4"

Foam lance with easywash365+easywash365+ spray gun, selectable versionSpray wand with extension ST-9.1 245 mmFoam nozzle ST-75 1.9 mmMax. 310 bar / 25 l/min / 150 °CInlet: 3/8 "IG rotatable

Content: 1 Piece

€163.43*

Foam lance ST-75-1.9 St-1500 Weep without

Foam lance ST-75-1.9 St-1500 Weep M16

Hose connection?: M16

Foam lance also suitable for Washtec SB systems Gun ST-1500Weep Spray wand with extension 333 mm Foam nozzle ST-75 1.9 mm Max. 310 bar / 25 l/min / 150 °C Inlet: 3/8 "IG

Content: 1 Piece

Variants from €173.33*

€176.19*

HP lance complete for HP cleaner SB Weep ST-1500 Washtec Version Connection and nozzle 3/8" 40065

HD nozzle?: 40065 | Hose connection?: 3/8"

Ideal for use in self-service areas with frost protection function. consisting of: High-pressure gun ST-1100 Weep (permanent frost protection) rigid lance 800mm overmoulded Nozzle on request Hose connection on request Nozzle as required Hose connection as required On request max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

Variants from €67.00*

€73.00*

High pressure gun ST-2620 1/2 "IG ROTATABLE : HOSE

Suttner Professional high-pressure foam gun with patented LTF technology - Low Trigger Force 90% lower holding force and 40% lower trigger force compared to standard guns on the market.Inlet: 1/2" IG rotatableOutlet: insulated lance 300 mm and foam nozzle 9040Max. 125 bar / 80 l/min / 150°CArea of application e.g. foam applications in vehicle pre-cleaning. Suitable for low pressure due to PEEK sealing cone.

Content: 1 Piece

€150.75*

High-pressure lance complete for high-pressure cleaner Single 1/4" without

HD nozzle?: without | Hose connection?: 1/4"

Ideal for use at self-service bays or in the pre-cleaning area. Consisting of: ST-1100 high-pressure gun Rigid lance 800mm overmoulded HD nozzle as required as required Hose connection n. as required max. 210 bar max. 25 l/min max. 150°C

Content: 1 Piece

€41.00*